How to Activate Windows 8.1 for Free .

New Download Links
New Download Links


*i*m*g*Try the Command Prompt. If the steps above don't work, you can try to enter the key through an elevated Command Prompt. Press ? Win+ X and select Command Prompt (Admin).Type slmgr.vbs /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX and press ? Enter, replacing the XXXXXs with your product key. Be sure to include the dashes. A window should appear saying Installed product key XXXXX successfully.Type slmgr.vbs /ato and press ? Enter. A window should appear saying Activating Windows(R) Your Edition. After a moment, if activation was successful, it will say Product activated successfully.Product keys are already included in the Windows 8.1 package. If you already have yours, you don't need to install one using the command prompt.Product keys can only be used on a limited number of computers. If you've reached the maximum number of computers, the key will be detected invalid.This article is written only for tutorial purposes. Always purchase and activate genuine Windows 8.1 OS to avoid software issues.Microsoft has made things quite easier for the users in the new operating system and for that they have also made changes to the way the product key is now available to the users. The new Windows 8 product key now comes embedded in the BIOS of the computer and not on a sticker that is usually placed at the bottom of the laptops. This has affected many users in many different ways as there are many users that are happy and not so happy about it. Here we take a quick look at the pros and cons of the new embedded Windows 8 product key.Be careful doing this with an Xbox. It may brick your device.Meet Lutherus, a wikiHow Administrator who’s been active in the community for over three years and has patrolled over 65,000 edits. He enjoys reviewing recent edits and protecting wikiHow articles from spam and vandalism. He’s proud of earning the trust of the community as an admin, and he loves the openness of the editing and the friendliness of the community here. He says that the encouragement of bold edits and improvements, the friendly atmosphere, and the amazing people are what makes wikiHow awesome. He advises new editors to be bold, be brave, and don’t be scared to make a mistake. He says, “We are all friendly, but most importantly, we are open-minded. If you find something you know about and you want to make it better, do it!”

How To Reserve Windows 10 If You Don't Have The Get Windows 10 App .

*i*m*g*A while ago, Microsoft pushed the Get Windows 10 app via its Windows Update channels. The app is supposed to help you reserve a Windows 10 copy for your computer, once it is officially released to the general public. However, many users didn't get this app and couldn't reserve their Windows 10 copies, even if, theoretically, they met all the requirements. This article will help you check if you meet the requirements for being eligible to a free Windows 10 upgrade, and also troubleshoot some issues that may stop your device from getting the reservation app.Note: This guide is sharing information on how to enable the Get Windows 10 app on a Windows device that didn't get it yet. If you already have the app in your system tray, then these two guides might prove useful to you:How To Reserve Your Free Upgrade To Windows 10How To Disable The Get Windows 10 Icon And Notifications Why You Might Not Have The Get Windows 10 App On Your Windows DeviceAccording to Microsoft, there are several reasons why you might not have the Get Windows 10 app on your device. You can find them all listed among the official Windows 10 frequently asked questions, here: Windows 10 QA. However, for your convenience, you can also check them below:Your device isn't up-to-date with at least Windows 7 Service Pack 1 or Windows 8.1 Update.Windows Update is turned off or is not set to receive updates automatically.You've blocked or uninstalled the necessary Windows Update service.Your device is not running genuine Windows.Your device is running Windows 7 Enterprise, Windows 8/8.1 Enterprise, or Windows RT/RT 8.1, which are excluded from the reservation offer.Your device is managed as part of a school or business network, in which case you'll have to check with your IT administrator about upgrading to Windows 10.PCs that Microsoft determines cannot run Windows 10 will not see the Get Windows 10 app before July 29th.

After July 29th, the icon will be enabled in the system tray. This is to help ensure that you can easily check your PC's compatibility if you choose. How To Fix The Issues That Stop You From Having The Get Windows 10 AppAs you've seen, there are multiple reasons why you might not have received the Get Windows 10 app. This is what you should do in order to fix the issues stopping you from getting the app:1. Run Windows Update and install any available updates.Once each and every available update is installed on your device, the first three issues we listed in the previous section should be resolved.If you need guidance on how to run Windows Update and/or install updates for your device, check these guides:Check for Windows Updates, Learn What They Do Block Those You Don't NeedConfigure How Windows Update Works In Windows 7 Windows 8.12. If you own a genuine Windows license, make sure it's activated.If you don't have a legal Windows copy, you are not eligible for the free Windows 10 upgrade. However, it's possible that you have a genuine license, but Windows thinks it's not, so it doesn't activate itself. If Windows is not activated, your device might not be able to download and install updates via Windows Update.

In such situations, you'll have to force Windows to activate.If you need help in determining whether your Windows copy is activated or not, check these guides:How to Learn If Your Copy of Windows 7 or Windows 8 is ActivatedWhat to do When Windows 8 Says Your Genuine Product Key is Not Valid?3. If none of the conditions we listed in the first section of this article apply to you, you can run a script that verifies if your device meets all the prerequisites and then turns on the Get Windows 10 app.This fix is based on some information shared on this Microsoft Answers community forum: I want to reserve my free copy of Windows 10, but I don't see the icon on the taskbar.Open Notepad or any other text editor and create a text file with the following content:REG QUERY HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsUpgradeExperienceIndicators /v UpgEx | findstr UpgExif %errorlevel% == 0 GOTO RunGWXreg add HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser /v UtcOnetimeSend /t REG_DWORD /d 1 /fschtasks /run /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser:CompatCheckRunningschtasks /query /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiserschtasks /query /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser | findstr Readyif NOT %errorlevel% == 0 ping localhost nul goto :CompatCheckRunning:RunGWXschtasks /run /TN MicrosoftWindowsSetupgwxrefreshgwxconfigThen, save this file under the name of ReserveWin10.cmd, somewhere on your device.Once the .cmd file is created and saved, you'll need to run it. To do so, first open a Command Prompt with administrative rights. One of the fastest ways to do it is to type cmd on Windows 8.1's Start screen or in the search box from Windows 7's Start Menu, then right click the Command Prompt result and select Run as administrator.Then, run the file we've previously created. Type its location and name inside the Command Prompt and press Enter. For example, if you saved the ReserveWin10.cmd file in a folder called Temp found on your D: drive, you should write:D:TempReserveWin10.cmdIf everything is OK, you will get a success message and the Get Windows 10 app should pop up in the system tray.However, if issues are found, the script can run for 10 to 30 minutes. During this whole time, you will see status reports, so all you have to do is be patient. If all the prerequisites are met by the time this script ends, you'll have the Get Windows 10 app on your device.If, unfortunately, the script fails and all you get is an infinite loop, it means that you don't have the prerequisite Windows updates installed.

If that's the case, run Windows Update to download and install all the updates available for your device. Also, to force the script to stop, simultaneously press Ctrl + C on your keyboard. ConclusionIf you want to reserve your free Windows 10 upgrade, but you don't have the Get Windows 10 app, there are still a few things you can do to get it. In this article we showed you all we've found about this. However, even if nothing works, you should only be patient and wait for July 29th, when Windows 10 will be officially released. Only then will you know for sure if Windows 10 will work for you or not. On July 29th, you'll have the Get Windows 10 app, and it will help you identify any compatibility issue between your device and Windows 10.I ran the command out of C:TempReserveWin10.cmd and recieved this messageMicrosoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation.

All rights reserved.C:UsersPikadudeC:TempReserveWin10.cmd'C:TempReserveWin10.cmd' is not recognized as an internal or external command,operable program or batch file.C:UsersPikadudeC:TempReserveWin10.cmdC:UsersPikadudeREG QUERY HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsUpgradeExperienceIndicators /v UpgEx | findstr UpgExERROR: The system was unable to find the specified registry key or value.C:UsersPikadudeif 1 == 0 GOTO RunGWXC:UsersPikadudereg add HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser /v UtcOnetimeSend /t REG_DWORD /d 1 /fERROR: Access is denied.C:UsersPikadudeschtasks /run /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility AppraiserERROR: Access is denied.C:UsersPikadudeschtasks /query /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility AppraiserFolder: MicrosoftWindowsApplication ExperienceTaskName Next Run Time Status======================================== ====================== ===============Microsoft Compatibility Appraiser 7/31/2015 4:33:58 AM ReadyC:UsersPikadudeschtasks /query /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser | findstr ReadyMicrosoft Compatibility Appraiser 7/31/2015 3:19:16 AM ReadyC:UsersPikadudeif NOT 0 == 0 ping localhost 1nul goto :CompatCheckRunningC:UsersPikadudeschtasks /run /TN MicrosoftWindowsSetupgwxrefreshgwxconfigERROR: The system cannot find the path specified.Do you know what went wrong or if I need to change something?For the record I'm running a Presario CQ57 Laptop with Windows 7 Home Edition Service pack 1 and as far as I can tell it's fully updated.Any help?replyWe noticed that you have enabled an ad blocker like AdBlock. If you weren’t using it, some banners would have appeared, but not the annoying pop-up or sound type.These banners help us earn the money required to keep this website alive. If you enjoy what we do, please add our website to your whitelist or deactivate AdBlock for this domain.*this message will be displayed only after a browser restart Thank you CategoriesProductivityEntertainmentSecuritySmarthomeSmartphoneHealth Other linksLogin / RegisterAdvanced searchSubscription optionsAbout usContactTerms and conditionsExcept where otherwise noted, all content is provided as is, with no warranties, and it is licensed under Creative Commons Attribution-Noncommercial-Share Alike 4.0 International. If you use materials published from this site for noncommercial purposes, you are kindly asked to mention our site as the source and post a link to the original article(s). Also, please be aware that some of our pages might have a different copyright noted, that applies to them.All products mentioned on our website are registered trademarks and/or trademarks of their respective companies.

How-To Geek .

*i*m*g*Windows 10 is Out Today: Should You Upgrade?Windows 10 is finally out — kind of. Microsoft initially promised that everyone could take advantage of the free upgrade... [Read Article]This is particularly useful if you’ve purchased a new Windows 10 PC and it includes manufacturer-installed bloatware you don’t want. Or, you may need to perform a clean install on a computer without an existing Windows system after installing a new hard drive. Of course, you’ll miss out on the good pre-installed apps, like the free DVD player program that comes with many PCs. However, you can always install VLC to get DVD playback or use one of the more fully featured Windows Media Center alternatives.Previously, Microsoft forced users to upgrade to Windows 10 before they could start fresh and do a clean install–which was annoyingly complicated and time-consuming. Now, things are much easier, since you can activate Windows 10 with a Windows 7, 8, or 8.1 key. Option One: Create Installation Media and Install Windows from ScratchHow to Download Windows 10, 7, 8, and 8.1 Install Media — LegallyYou can reinstall Windows from scratch using the product key that came with your PC, but you’ll have to find... [Read Article]The classic method of performing a clean install is still our go-to option with Windows 10.

You just need to download and create installation media, either on a DVD or a flash drive, and install it from there.Download the Windows 10 media creation tool from Microsoft. This tool will download the correct Windows 10 installation files for your system, and help you create an installation DVD or flash drive. Start it up and select the “Create installation media for another PC” option to create installation media.Be sure to select the correct type of installation media for the copy of Windows 10 that’s licensed for your PC — Windows 10 Home or Professional. (If “Windows 10” is the only option, you can safely use that and it will detect what version you want.) You should also choose your language and select whether you want the 32-bit or 64-bit version of Windows here. Most people will want the 64-bit version, but you can create installation media that includes both, and the installer will automatically select the most appropriate one when you use it to install Windows on a computer.Install Windows 10 from the installation media like you would any other operating system. Restart your computer with the USB drive or DVD inserted, and boot from that device.

This may require you change a setting in the BIOS, access a boot menu, or use the “Use a device” option in the advanced startup options on a modern Windows 8 or 10 device that includes UEFI firmware instead of the traditional BIOS. Select “Install Now” once the Windows installer starts.Next, you’ll see the activation screen. What you do here depends on your situation:If you’ve never installed and activated Windows 10 on this computer before, you’ll see the activation screen. Enter your Windows 10 key here. If you don’t have one, but you have a valid 7, 8, or 8.1 key, enter it here instead.If you’ve ever installed and activated Windows 10 on this computer before, click “I don’t have a product key”.

Windows will automatically activate once it’s installed.The second situation works because of how Windows 10 activates PCs. When you install and activate Windows 10 on a system for the first time, the installer confirms that you have a “ genuine Windows” system installed and registers your hardware with Microsoft’s servers. After that, you shouldn’t have to enter that key again on the same PC–Microsoft will recognize your hardware the next time you install Windows 10 on that machine, confirm it’s registered, and automatically activate itself.Go through the setup process normally until you see the “Which type of installation do you want?” screen. Select the “Custom” option to ensure you’re performing a clean install and not an upgrade install.Partition your system drive however you like. If you just have a single Windows partition, you can tell the installer to overwrite it. If you have many partitions, you could delete them all and tell Windows 10 to install itself in the unallocated space.After you log into your new, cleanly installed Windows 10 system, it should automatically activate itself after you connect to the Internet.To ensure it activated correctly, open the Start menu and click on Settings. click the Update Security button, and go to the “Activation” tab.Verify that you see “Windows is activated” here. Also, note the edition of Windows 10 you have installed — either Windows 10 Home or Windows 10 Pro. Most people will receive the Home edition as part of the free upgrade from 7 or 8, but you’ll get Windows 10 Pro if you previously had a Professional edition of Windows 7 or 8 installed.When we reinstalled Windows 10 Pro on our computer, it activated immediately.

But, if Microsoft’s activation servers are overloaded, so it may take some time before your system activates. If it’s not activated, you may see information here that can help you activate.Some people report having to reboot several times, while others have just waited. The following command can force an activation to occur if it’s not happening automatically after going through the steps above. First, open an Administrator Command Prompt by right-clicking the Start button or pressing Windows Key + X and selecting Command Prompt (Admin). Type the following command and press Enter:slmgr.vbs /atoMany people report having to run this command several times. if you see an error message, try rebooting and running it again, wait and run it again, or just wait and let Windows activate automatically. Microsoft’s servers may be overloaded at the moment you’re trying to activate.Option Two: Perform a Reset and Remove EverythingIf you’ve already upgraded to Windows 10 and want a fresh install, there’s an easier method. You can use the Reset feature to reset your Windows 10 system back to a fresh state.

 If you installed Windows 10 yourself, this should give you a fresh Windows system in no time.There are a few caveats, however: this method isn’t ideal for every situation. If you purchased a computer that came with Windows 10, for example, this will likely bring back the bloatware that came with your Windows 10 PC. ( There’s a way around this, but we’ve yet to test it ourselves.)In addition, some people have reported that it won’t fix some system corruption issues, in which case you’d want to perform a real clean install using Option One above.To reset your Windows 10 PC, open the Settings app, select Update security, select Recovery, and click the “Get started” button under Reset this PC. Select “Remove everything.” This will wipe all your files, so be sure you have backups.Microsoft’s free upgrade offer depends on your PC’s hardware so it may not activate properly if you’ve swapped out hardware inside your PC activate windows 8.1 kms command line. You may need to call Microsoft and complete the phone activation process, explaining what happened, if you changed the PC’s hardware after taking advantage of the offer. The phone support line can give you an activation code that will allow you to activate Windows 10, even if it won’t activate automatically. However, you may have to provide additional information.Technically, the free Windows 10 upgrade (as well as OEM copies of Windows and pre-installed copies of Windows 10) aren’t supposed to be transferred to a separate PC.

But often, the phone activation process will let you do it anyway, so it’s worth a shot.Image Credit: Brett Morrison on FlickrFirst, you probably want to wait a month or so to see how the public release plays out for everyone else. Give them a chance to shake out any bugs.After that, it should be (relatively) trivial for a two-man team (or even one person) to just run the regular upgrade process on each machine over the course of a few nights.If you want to do a clean install on each computer instead, that would require a bit more work. At the very least, you'll need to add in a step for backing up user profiles and data on each computer (and restoring that data after the install).Beyond that, the process depends on what (if any) special mechanisms have been put in place by Microsoft to facilitate bulk free upgrades for businesses. If there are none, you'll more or less have to follow the article's process on each and every computer.Create install media.(Strictly, you only need to do this once and you can re-use the media on all your PCs. If you want to run more than one install at a time, you'll have to make a few copies.)Back up user data.Install the upgrade as normal.Make sure product activation has completed.Perform the clean install re-activate Windows.Restore user data.It seems like a lot, but again it should be relatively little trouble for one or two techs to do this for 40-50 PCs over the course of a few nights. You'll want to start small, like a half-dozen or so on that first night, to get a feel for how the process works and see if there were any problem areas you forgot to cover in your procedure. After that, a dozen or more per night should be very doable - especially if there's two people working on it.zain2102:So this free Windows 10 offer isn't available for Windows 7,8 8.1 Enterprise - is this true?It depends.Customers of Windows 7 or 8.1 Enterprise under an active Software Assurance (SA) contract with Microsoft are entitled to obtain Windows 10 Enterprise under their existing terms, as with previous versions of Windows. Enterprise customers whose SA agreement is expired or are under a volume license that does not have upgrade rights, ... are not entitled to freely upgrade to Windows 10When upgrading my laptop to Windows 10 Pro (64-bit), I came across this neat little trick online for finding your Windows product key...Paste this into notepad:Set WshShell = CreateObject(WScript.Shell)MsgBox ConvertToKey(WshShell.RegRead(HKLMSOFTWAREMicrosoftWindows NTCurrentVersionDigitalProductId))Function ConvertToKey(Key)Const KeyOffset = 52i = 28Chars = BCDFGHJKMPQRTVWXY2346789DoCur = 0x = 14DoCur = Cur * 256Cur = Key(x + KeyOffset) + CurKey(x + KeyOffset) = (Cur 24) And 255Cur = Cur Mod 24x = x -1Loop While x = 0i = i -1KeyOutput = Mid(Chars, Cur + 1, 1) KeyOutputIf (((29 - i) Mod 6) = 0) And (i -1) Theni = i -1KeyOutput = - KeyOutputEnd IfLoop While i = 0ConvertToKey = KeyOutputEnd FunctionThen save as type to all files, change the name to productkey.vbs, save it and open it.This gives you your new Windows 10 product key, which you can write down and save for future reference.

Should you ever need it. Such as when doing a clean install.Edward_Gudz:This is probably something that Microsoft did not foresee and is now closing the loophole on.Why would doing a clean install be considered a loop hole? People have been doing it for ages, so there's no reason it shouldn't be allowed for Windows 10.Think about it: you have either a Windows 7 or 8.1 machine -- you get to upgrade for free -- Once you've upgraded, you decide to do a clean install, so you can start from scratch. The only difference now is that you have a bare-bone Windows 10. What reasons would Microsoft have for not allowing that?Now, I have no idea why yours wouldn't activate, (did you make sure to upgrade first?) but I know for certain that you do not need to waste your money on a whole new key in order to do a clean install.Many, many people have gone through the upgrade, then re-install on a wiped drive experience, and it's worked.

I've done it myself - twice. More than a few people have called Microsoft to get their activations fixed after a clean install. Others have used tools to extract the key from the registry.Perhaps the rep is misinformed. Perhaps the official policy and the effective policy are different.Heinlien's Razor says something like Don't attribute to malice what can be explained by stupidity.You don't know this is intentional. It's more likely that with everything, this rep just missed a meeting or fell asleep in a rushed training session.wilsontp:Many, many people have gone through the upgrade, then re-install on a wiped drive experience, and it's worked.

I've done it myself - twice. More than a few people have called Microsoft to get their activations fixed after a clean install. Others have used tools to extract the key from the registry.Perhaps the rep is misinformed. Perhaps the official policy and the effective policy are different.Heinlien's Razor says something like Don't attribute to malice what can be explained by stupidity.You don't know this is intentional. It's more likely that with everything, this rep just missed a meeting or fell asleep in a rushed training session.Informed or misinformed two separate reps gave me the same answer.BTW - Exactly what tools can one use to extract the key from the registry? I'm not talking about extracting the generic key used for the upgrade either.That's a good question.

I'm using MSDN keys on most of my machines, although the machine I'm on right now is using an upgrade key.Let me see what I can find out.As it turns out, @raphoenix posted a VB Script to do this for past versions of Windows. Let's see if it works again.... just tried it and got a key that looks legit, and two different systems gave me two different keys. I'll need to test this on my home PC's with their known keys to tell you for sure. .

*i*m*g*Did you download Windows 8 Enterprise using your MSDN or TechNet subscription for testing in your lab? As the full-featured business edition of Windows 8, the Enterprise SKU defaults to using corporate Volume License activation on a business network. On a business network, this process provides a simplified end-user activation experience, because Windows 8 Enterprise automatically determines which servers to activate against using DNS without you needing to manage individual activation keys for each PC. To learn more about the Windows 8 Volume License activation process on a business network and the new Active Directory-based activation process, click here.But, what if I'm testing Windows 8 Enterprise in an isolated lab environment?This VL activation process works well in a business environment to simplify and automate the overall activation experience, but if you're testing Windows 8 Enterprise in an isolated environment, then you'll encounter an error during the activation process and activation will not successfully complete. This is because your Windows 8 Enterprise PC cannot find the appropriate DNS records to determine how to automatically activate. But, there's an alternative! In your TechNet and/or MSDN subscription portal, you have the ability to claim a Multiple Activation Key (MAK) for activating Windows 8 Enterprise by clicking the Product Keys button activate windows 8.1 command prompt. The MAK is an alternative Product Key that doesn't require the same corporate VL activation process on a business network.Great!

I've got my MAK - What do I do now?To enter your MAK on Windows 8 Enterprise and successfully activate, you can complete one of the following steps:Command Line option:Hit the Windows+R hotkeys to open the Run box and run the following command:slmgr -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxxGUI option:Hit the Windows+R hotkeys to open the Run box and run the following command:slui.exe 3This command will open the following Dialog Box in which you can manually enter your MAK:Enter your MAK in the Product Key field shown above, click the Activate button and you should be good to go!HTH,KeithKeith Mayer is a Principal Technical Architect at Microsoft, focused on helping ISV partners leverage the Azure cloud platform. Keith has over 20 years of experience as a technical leader of complex IT projects, in diverse roles, such as Network Engineer, IT Manager, Technical Instructor and Consultant. He has consulted and trained thousands of customers and partners worldwide on design of enterprise technology solutions.Keith is currently certified on several Microsoft technologies, including Azure, Private Cloud, System Center, Hyper-V, Windows, Windows Server, SharePoint, SQL Server and Exchange. He also holds other industry certifications from VMware, Amazon AWS, IBM, Cisco, Citrix, HP, CheckPoint, CompTIA and Interwoven.You can contact Keith online at Support .

*i*m*g*What is KMS?Microsoft Key Management Services (KMS) provides a way to automatically activate volume license editions of Microsoft Windows and Microsoft Office. It is designed to allow Volume Licensing customers to automate the activation process in a way that is transparent to end users. Volume Activation applies to systems that are covered under a Volume Licensing program and is used strictly as a tool for activation and not tied to license invoicing or billing. Supported ProductsKMS activation is available for the following Microsoft products that are distributed by Software Acquisitions Office.Windows 7 (Enterprise Edition)Windows 8 / 8.1 (Enterprise Editions)Windows 10 (Education and Enterprise Editions)Windows Server 2008 / 2008 R2 (Enterprise Editions)Windows Server 2012 (Enterprise Edition)Microsoft Office 2010 2013 How KMS WorksWhen a supported version of Windows or Microsoft Office is installed, the computer will attempt to discover the KMS Server on the network. This is accomplished by checking for a SRV record in the DNS Zone of the computer. If that record is present, the computer will contact the KMS server and automatically activate the license. KMS activations are valid for 180 days.

The computer will periodically check in with the KMS server to renew the computer’s activation.Please note: the initial KMS activation process requires network connectivity to the campus network, either through a wired, wireless, or VPN connection. Computers must also connect to the campus network at least once every 180 days to re-activate.KMS is not a suitable activation method for computers that do not have network access or do not connect to the campus network at least once every 180 days. In these cases, there is an alternate activation method, Multiple Activation Key (MAK). Click here to see more information about ordering the appropriate media from Software Acquistions. Activating with KMS: New Installations From Networks That Allow KMS Automatic DiscoveryMost networks on campus, including wireless networks will allow KMS if it is available, and your software should automatically activate. No action should be required.

However you can check to see if the auto-discovery is allowed on your network by doing the following:Note: For automatic discovery to work, the KMS SRV record must be present in the DNS zone of the computer. For example, a computer with the DNS address would check the zone. A computer with the DNS address would check the zone. To determine if the required record is present in a domain, run the following command using command prompt for windows: nslookup -type=srv _vlmcs._tcp.Note: Replace the with your domain such as “”If the correct record is present, you should see something like this:_vlmcs._tcp. SRV service location:priority = 0weight = 100port = 1688svr hostname = this test fails, you will need to have the following DNS record added to the DNS zone:_vlmcs._tcp.. 3600 IN SRV 0 100 1688

From Networks That Do Not Allow KMS Automatic DiscoveryIn cases where automatic discovery doesn’t work, Windows and Microsoft Office can be manually pointed to the KMS server. To manually activate Windows or Microsoft Office, use the following steps: Manual Windows ActivationOpen a command prompt with elevation (Right click and run as administrator).Run the following command to point Windows to the KMS server. cscript c:windowssystem32slmgr.vbs -skms the following command to activate Windows. cscript c:windowssystem32slmgr.vbs -ato Manual Microsoft Office ActivationIn cases where automatic discovery doesn’t work, Microsoft Office can be manually pointed to the KMS server. To manually activate Microsoft Office, use the following steps:Open a command prompt with elevation.Navigate to the Office installation folder using the “CD” command. These are the typical folder locations:Office 2010 32-bit: C:Program Files (x86)Microsoft OfficeOffice14Office 2010 64-bit: C:Program FilesMicrosoft OfficeOffice14Office 2013 32-bit: C:Program Files (x86)Microsoft OfficeOffice15Office 2013 64-bit: C:Program FilesMicrosoft OfficeOffice15Example: CD C :Program FilesMicrosoft OfficeOffice15Press EnterRun the following command to point Office to the KMS server. cscript ospp.vbs / the following command to activate Office. cscript ospp.vbs /act Activating With KMS: Switching from MAK ActivationIf you have previously activated Windows or Microsoft Office by typing in a Product Key, your IT admin can switch your activation method to KMS. He or she would also need to do this if someone attempted to activate your software with an invalid or expired Product Key. IT admins should do the following steps: Windows and Windows Server (all supported versions):Note: Generic License Volume Key (GLVK) means you will need to replace the text “GLVK” with your key.Open a command prompt with elevation (Right click and run as administrator).Run the following command to point Windows to the KMS server. cscript c:windowssystem32slmgr.vbs /ipk GLVK(type out your key here)Press Enter.Run the following command to activate Windows. cscript c:windowssystem32slmgr.vbs -atoPress Enter.Close the command prompt window.

Microsoft Office (all supported versions)Open a command prompt with elevation.Navigate to the Office installation folder using the “CD” command. These are the typical folder locations:Office 2010 32-bit: C:Program Files (x86)Microsoft OfficeOffice14Office 2010 64-bit: C:Program FilesMicrosoft OfficeOffice14Office 2013 32-bit: C:Program Files (x86)Microsoft OfficeOffice15Office 2013 64-bit: C:Program FilesMicrosoft OfficeOffice15Example: CD C :Program FilesMicrosoft OfficeOffice15Press EnterRun the following command to point Office to the KMS server.cscript ospp.vbs /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXXPress Enter.Run the following command to activate Office.cscript ospp.vbs /actPress Enter.Close the command prompt window. Activating from Off CampusOur KMS activation server is only reachable from within the UNC network. However, you can still activate via KMS from off-campus by connecting to UNC Network with our Virtual Private Network (VPN) service. When you connect to UNC via VPN, your computer is on the UNC network, and has full access to services that are restricted to campus. This includes the KMS activation server. For instructions on how to configure the Virtual Private Network (VPN) service, please see our VPN Installations and Clients document.Once you have connected to the VPN server, your software should activate automatically. The activation will be good for 180 days.

If 180 days pass without reconnecting to the UNC network, your software will enter its 30-day grace period mode, and display a warning message. You can take that as a prompt to connect to the VPN again.Please note that it can take up to two hours for automated activation to take effect. If you need to activate sooner, you may follow the manual KMS activation procedure above while connected to the VPN.

How to Enable ‘Get Windows 10’ App icon in the Windows 7/8.1 taskbar? .

How to Activate Windows 8.1 for Free . activate windows 8.1 pro command lineMake or force Windows 7/8.1 to show ‘Get Windows 10’ app icon in the taskbar to Reserve Upgrade. The long wait has ended, Microsoft has officially announced the launch date of Windows 10, its on July 29. If you’re running qualified Windows 7 SP1 or Windows 8.1 (update), you’ll see the ‘Get Windows 10’ app icon of Windows in the tray to reserve your PC for free Windows 10 upgrade if you don’t see it, the reasons could be:1. Your device isn’t up-to-date with at least Windows 7 SP1 or Windows 8.1 Update.2. Windows Update is turned off or is not set to received updates automatically.3. You’ve blocked or uninstalled the necessary Windows Update functionality.4. Your device is not running genuine Windows.5. Your device is running Windows 7 Enterprise, Windows 8/8.1 Enterprise, or Windows RT/RT 8.1, which are excluded from this reservation offer.6.

 Your device is managed as part of a school or business network. (Check with your IT administrator.)7. PCs that we determine cannot run Windows 10 will not see the Get Windows 10 app before July 29th. After July 29th, we’ll enable the icon in the system tray. This is to help ensure that you can easily check your PC’s compatibility if you choose.READ: Windows 10 build 10122 Default Apps Issue: How to set Chrome as default browser?Running Windows Update would resolve the first three issues. If you still don’t see the icon after installing all the updates, follow the below steps.

Enabling ‘Get Windows 10’ App icon in the Windows 7/8.1 taskbarMethod I:1. Open the Notepad2. Copy the following text and paste into the notepad ( Updated the script)REG QUERY HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsUpgradeExperienceIndicators /v UpgEx | findstr UpgExif %errorlevel% == 0 GOTO RunGWXreg add HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser /v UtcOnetimeSend /t REG_DWORD /d 1 /fschtasks /run /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser:CompatCheckRunningschtasks /query /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiserschtasks /query /TN MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser | findstr Readyif NOT %errorlevel% == 0 ping localhost nul goto :CompatCheckRunning:RunGWXschtasks /run /TN MicrosoftWindowsSetupgwxrefreshgwxconfig3. Save it as ‘ReserveWindows10.cmd’ to a directory called temp or whatever you like in C drive. Update: You can download the script file from here.4. Run the file by opening command prompt as administrator5. Once your PC is compatible, you’ll see success message at the end and a schedule task will start to open the app (check the screenshot below).UPDATE: Those who found the script running for a long time or stuck in a loop, download and run this file.This has worked for me, found it here.ALSO SEE: Windows 10: Disable Windows Defender’s Message ‘This App has been turned off and isn’t monitoring…’UPDATE: Updated the script above.

According to Microsoft, “The Microsoft Compatibility Appraiser can take 10 – 30 minutes to run, during which the script will continuously provide status reports that it is running. Please be patient.If the script is failing in an infinite loop, then you don’t have the necessary prerequisite Windows Updates. Besides requiring Windows 7 SP1 or Windows 8.1 Update, you must also have installed:For Windows 7 SP1:KB3035583KB2952664For Windows 8.1 Update:KB3035583KB2976978”You can manually check if you have these updates within your elevated command prompt by typing the command:dism /online /get-packages | findstr 3035583(Replace the KB number with whichever update you are looking for.) If you have the update installed, this command will show the package identity. For example, Windows 8.1 users should see this:C:dism /online /get-packages | findstr 3035583Package Identity : Package_for_KB3035583~31bf3856ad364e35~amd64~~ II:If the above method doesn’t work for you, try the below one.1. Control Panel Administrative Tools Schedule Tasks2. Task scheduler library Microsoft Windows Setup GWXTriggers , select ‘refreshgwxconfig-B’ and run it.Please note I can’t assure you this will work, but give it a try if the script doesn’t work for you.Method III:Here we’re sharing a batch file provided by Microsoft community moderator.Download the batch file from the below link and follow the on-screen instructions.Try this alternate link for if you’ve issues in the downloading the file from above (removed because dropbox file download page is not opening).After extracting the file, you need to right click on it and select’Run as administrator’.Note: This batch file makes changes to files and registry settings, we’ve not tested it.

Try it at your own risk.Video for Method 3:From the comments, try these if the above instructions doesn’t work:1. If your device is a member of domain, remove it from domain and add it to local ‘workgroup’.2. Uninstalling and reinstalling KB3035583 update has showed the icon in the tray for some users. 3. Direct Download links for required Windows Updates:For KB3035583:Windows 7 X86For Windows x64Windows 8.1 x86For KB2952664Windows 7 x86Windows 7 x644. Second option in Method 3 for batch file is working for some users.UPDATE JULY 31: Microsoft has released a troubleshooting tool for systems that haven’t got the icon, visit the below link, download and run tool on affected systems.Microsoft releases Troubleshooter tool to Show ‘Get Windows 10 App’ in your System TrayHave you reserved your Windows 7/8.1 PC for the Windows 10 upgrade?UPDATE July 29, 2015 RESERVED, WHAT NEXTIf you’ve successfully reserved your PC for Windows 10 upgrade, know this: Microsoft has pushed Windows 10 downloading to reserved systems. Check below links or this site Home page for latest information on what’s happening.READ: Windows 10 downloading not happening on your reserved computer? Try this commandUsing the Media Creation Tool released by Microsoft for windows 10 (check the below link), you can able to quickly upgrade to Windows 10 from Windows 7 or 8.1 — trust me this is downloading the OS quicker than the Windows Update– (internet connection is required) or download the ISO file.

If your Windows 10 downloading taking lot of time (check $Windows.~BT Folder. in reserved system drive, it should be around 6 GB), then use tool to upgrade to Windows 10 .How to create or download Official Windows 10 ISO file by using Microsoft’s Media Creation ToolDATE JULY 31, 2015 HI ALL, PLEASE CHECK MY COMMENT (please read every word in it you’ll get the answer or solution, if not ask me in comments.)August 1st, 2015, READ THIS: Microsoft says reserved users can also use Media Creation Tool for the UpgradeI am closing comments on this post, sorry, I already said what you should be doing in a comment and added an update in the post as well. The news I’ve added now tells it all. Thanks to All. AUGUST 4, 2015 Easy Alternative to Media Creation Tool and Windows Update to upgrade to Windows 10If you’ve encountered errors when running the Media Creation Tool for the upgrade, use the below article to get direct download links for Windows 10 ISO, after that, right click on the ISO and select ‘Mount’ option, run the setup in it and choose ‘Upgrade to this PC’ option. Hope this helps.Use this trick to get direct download links for Windows 10 ISOHi Venkat,I have Genuine Windows 8.1 Pro and Updates KB2976978 and KB3035583 installed. After the installation of KB3035583, a folder named “GWX” containing certain executable applications (*.exe files) was found in C:WindowsSystem32. The problem is that I tried three methods to get a Start Button Like Icon with ‘get Windows 10? prompt in notification tray.Method 1: Your method of script. I did exactly the same thing, what you have directed us to do.

But that didn’t work, :’-(Method 2: Your 2nd method” 1. Control Panel Administrative Tools Schedule Tasks2. Task scheduler library Microsoft Windows Setup GWXTriggers3. select ‘refreshgwxconfig-B’ and run it. ” . That too didn’t worked. :’-(Method 3: I went to C:WindowsSystem32GWX and tried to execute “GWX.exe”, “GWXConfigManager.exe”, “GWXUX.exe”, “GWXUXWorker.exe” . But again, none of them executed.My Windows is genuine, my laptop is compatible, main two updates have been installed. Then why I am facing such problem.Help me Please.shivamJune 21, 2015 @ 9:37 amThanks for this info, Venkat. I’m still having problems …Ran the script, tried the task scheduler, checked that the required updates are installed and still no joy. The icon does not appear in the task bar.The last line after running the script indicates “SUCCESS”. Any ideas?From running the script … lots of duplicate lines deleted for brevity …C:UsersAdministratorDesktopschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser” | findstr ReadyC:UsersAdministratorDesktopif NOT “1” == “0” ping localhost 1nul goto:CompatCheckRunningC:UsersAdministratorDesktopschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”Folder: MicrosoftWindowsApplication ExperienceTaskName Next Run Time Status======================================== ====================== ===============Microsoft Compatibility Appraiser 6/3/2015 3:28:24 AM RunningC:UsersAdministratorDesktopschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser” | findstr ReadyC:UsersAdministratorDesktopif NOT “1” == “0” ping localhost 1nul goto:CompatCheckRunningC:UsersAdministratorDesktopschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”Folder: MicrosoftWindowsApplication ExperienceTaskName Next Run Time Status======================================== ====================== ===============Microsoft Compatibility Appraiser 6/3/2015 3:02:24 AM Running…..C:UsersAdministratorDesktopif NOT “0” == “0” ping localhost 1nul goto:CompatCheckRunningC:UsersAdministratorDesktopschtasks /run /TN “MicrosoftWindowsSetupgwxrefreshgwxconfig”SUCCESS: Attempted to run the scheduled task “MicrosoftWindowsSetupgwxrefreshgwxconfig”.C:UsersAdministratorDesktopdism /online /get-packages | findstr 3035583Package Identity : Package_for_KB3035583~31bf3856ad364e35~x86~~ /online /get-packages | findstr 2952664Package Identity : Package_for_KB2952664~31bf3856ad364e35~x86~~ Identity : Package_for_KB2952664~31bf3856ad364e35~x86~~ 3, 2015 @ 1:39 amREG QUERY “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsUpgradeExperienceIndicators” /v UpgEx | findstr UpgExif “%errorlevel%” == “0” GOTO RunGWXreg add “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser” /v UtcOnetimeSend /t REG_DWORD /d 1 /fschtasks /run /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”:CompatCheckRunningschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”schtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser” | findstr Readyif NOT “%errorlevel%” == “1” ping localhost nul goto :CompatCheckRunning:RunGWXschtasks /run /TN “MicrosoftWindowsSetupgwxrefreshgwxconfig”Maybe you can try this one if you keep on getting that loop of reports. Some of them say it workedivanJune 3, 2015 @ 7:26 amI have been having problems trying to get the Windows 10 app to appear, although I did manage to fix it.I have recently re-installed Win7 when I found out about the Win10 app.

I could not figure out how to make it appear no matter how much I tried.My solution : Right Click – Computer – Select Properties – Scroll down and check if your Win7 has actually been activated. I noticed it was not activated. Activated it, Reboot, Boom! it appeared.After a few hours of trying to get it to work the answer was so simple *facepalm*My Win7 activation was set on a timer for a couple of days *for some reason?*Thanks for the instructions, I have had fun :PAndyJune 3, 2015 @ 12:14 pmI have the same problem, that I don’t get any icon.The last three days I’ve been testing ALL (!!!) of the methods from this website: no succes at the end.Interesting to notice is that I didn’t get the GWXTriggers folder in task scheduler (just have the gwx folder like others posted) until I startet the script of the topic. Now the script is in an loop for about 10 Minutes, nothing happens, but now I got the GWXTriggers folder but it is empty and the loop in de script file continous.I think, there’s a problem with the CompatcheckRunning, other scripts taht I tested gave me an ERROR, that the path and CompatcheckRunning doesn’t excist. This script from the topic stops at the CompatcheckRunning, too.I’m off of all of my strength and I don’t know what I should do know.P.S.: Yes, Ive genuine Win 8.1 Pro, activated, ALL updates, reinstalled the two neccessary updates and so on :) . Nothing helps….WEZ8FIJune 4, 2015 @ 4:07 amThis worked for me…Go to C:/ or your OS drive…and search for GWX file… it is present in the folder C:/Windows/WinSXS/wow64_microsoft-windows-gwx_31bf3856ad364e35_6.3.9600.17813_none_abd5ff8f5e617f0d/GWXRun the GWX application…and you should be good 2 go..If you are unable to find it…Click File explorer, type in the address bar C:WindowsWinSxS and search for the folder below.x86_microsoft-windows-gwx_31bf3856ad364e35_6.3.9600.17813_none_4562b9b971a34bdc It should show up or a similar version.Marcelo GobettiJune 16, 2015 @ 7:45 amThe script worked perfectly fine. All the updates are installed. I have an activated version of Windows 8.1 pro.

Now I have been running the refreshgwxconfig-B for around 10 mins. How long should I keep it running? Do I need to restart my computer before I see any icon in the taskbar.You told to check the Windows Update option the the Control Panel. There was a small update of Windows Defender (~41KB). When I tried to install that, there was an error that “Windows Update is currently installing other updates”, though I cannot see any update to be running. Is something good happenning in the background?Venkat eswarluJune 4, 2015 @ 3:07 pmHello,I still do not have the notification icon or GWX triggers. I looked in Windows Update in the Control Panel and there isn’t any notification of Win 10. I do have the GWX folder.

The GWX.exe is in both system 32 and WOW 64 files. I have logged in as Administrator and ran both of these without success.Any further help would be greatly appreciated. Again, I have run the scrips several times getting a success at the end, but the notification icon does not appear.@GorguesJune 4, 2015 @ 5:33 pmI have a solution that worked for me1. Search for task scheduler in windows search2. Run task scheduler and open Task scheduler library Microsoft Windows Application experience3. Right click Microsoft Compatibility Appraiser and click properties4. Go to the settings tab5. Tick allow task to be run on demand6.

UNTICK “stop the task if it runs longer than xxx”7. Click ok, then right click Compatibility Appraiser again, and hit run8. Let it run as long as it needs too *bear in mind it took about 5 hours to finish on my pc, so go do something else for a while*9. Wait until it has completely finished and is no longer visible in the task manager (the process is called Rundll32.exe and it will be using 20% cpu while it’s running)10. Restart your pc.The icon should appear after reboot, as long as you let the compatibility appraiser run for as long as it needs.Hope this works for someone :)PhoenixJune 22, 2015 @ 12:09 pmOK Guys I managed to get it sorted since posting my above comment, and I have again registered for the free upgrade.

I found a Dropbox link on another site for a batch file which has various options for you to try. You need to run the batch file as administrator by right clicking the batch file and selecting Run as administrator. Option 2 fixed it for me even though option 1 reported that update KB2952664 was missing from my system. The Windows 10 upgrade app icon appeared on my system tray instantly. For those who are having trouble getting the app to appear who wants to try this, here is a link to the page where you can read the article and find the Dropbox download link.

Hope it works for you guys, good luck. eswarluJune 7, 2015 @ 7:53 pmI concede defeat. Some people are just not going to get this and I’m one. I have a valid copy of Win 7 SP1, I have updates on, I have both updates, I’ve even uninstalled and reinstalled the updates multiple times, I have the GWX folder, I’ve run the script as administrator (both the one I created and the downloadable one) dozens of times and both as right clicking and from a CMD prompt window and it tells me Error: system cannot find the file specified. I’ve even done a full reinstall and repeated everything. I’m surrender.I’m not going to get this update.Venkat eswarluJune 8, 2015 @ 6:47 amI have tried everything on this page for days with no success. Finally this worked in less than a minute.Instructions to run the tool:1.

Go to and download the file.2. Copy the win10fix_full.bat file to anywhere else like desktop.3. Right click the file and click run as administrator.4. Follow the screen instruction untill to come to main menu screen.5. On main menu screen do step 1 first and check if you go the updates insalled and and then press any key it will take you back to main menu.6.

Now do step 2 which only takes like 1 second and should have the icon in the task bar.GaryJune 9, 2015 @ 4:00 amI don’t know which method but it worked. I used the first script (looped for an entire night while I was sleeping and success never showed up), I used the seconds script (success appeared at the first try but not the icon), I tryed the Schedule Tasks, but again no icon, I manually unistalled and reinstalled KB3035583 and nothing again. All of that yestarday and the day before, then I just give up and today the icon appeared alone. I dunno if that’s patience or luck. Thanks again for this detailed guide (the most detailed that I found atm).Venkat eswarluJune 9, 2015 @ 2:36 pmThanks Venkat sir..At first,nothing really happened with the scripts,and the 2nd method.Then I re-installed my windows 7 ultimate 64bit.Got the KB3035583 update on the same day.Then after 2 days,I got KB2952664 update.Then I ran the scripts..Restarted and Bingo..For others,who have no luck with the above methods,try this script..Open Command prompt as admin,and pastereg add “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser” /v UtcOnetimeSend /t REG_DWORD /d 1 /fschtasks /run /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”:CompatCheckRunningschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”schtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser” | findstr Readyif NOT “%errorlevel%” == ” 1? ping localhost nul goto :CompatCheckRunning:RunGWXschtasks /run /TN “MicrosoftWindowsSetupgwxrefreshgwxconfig”Then hit “Enter”..Like all the others who said before,,Patience is the key…Joe SlawsonJune 10, 2015 @ 10:10 pmJust posting ‘feedback’ to say that after eight days of trying I now have the Windows 10 upgrade icon showing on both my Laptop and PC.

I cannot say precisely how I finally managed to succeed but I did try every suggestion on this ‘Post’. Yesterday I deleted KB2952664 and KB3035583 from the Laptop and replaced them with the standalone installer links given on this ‘forum’ and it worked immediately. I am grateful for all the help that has been provided and all the suggestions made.Venkat eswarluJune 11, 2015 @ 3:25 pmMr.Venkat i tried as if you are saying by running the batch file in the method 3. it does’nt work and still the problem occurs and also its says “GWUWX” HAS STOPPED WORKING. but in windows update tab its says your pc has been reserved for windows question is that will that windows 10 icon on system will work properly or not? and also it shows in windows update that have i reserved so can i beleive that i have reserved?and i uninstalled that update and the the icon disappeared again i reinstalled the update and run the batch file 3 and again the icon is just blinks and force stops. PLEASE HELP ME TO THIS PROPLEM!PLEASE!!..Venkat eswarluJune 13, 2015 @ 6:44 amNothing seemed to work for me. I found this on another site and it worked instantly!Create a file with the name of anything.bat with the following code and then run as administrator:REG QUERY “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsUpgradeExperienceIndicators” /v UpgEx | findstr UpgExif “%errorlevel%” == “0” GOTO RunGWXreg add “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser” /v UtcOnetimeSend /t REG_DWORD /d 1 /fschtasks /run /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”:CompatCheckRunningschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”schtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser” | findstr Readyif NOT “%errorlevel%” == “0” ping localhost nul goto :CompatCheckRunning:RunGWXschtasks /run /TN “MicrosoftWindowsSetupgwxrefreshgwxconfig”pauseDebi LordJune 15, 2015 @ 9:18 amMake sure you have installed following updates:For Windows 7 SP1:KB3035583KB2952664For Windows 8.1 Update:KB3035583KB2976978Now download the file from dropbox from the link mentioned in method 3 i.e. it and run win10fix_full.bat as ADMINISTRATOR.In Cmd first select the option 1 to make sure that you have required updates(It will require only above mentioned updates).Finally, Go to main menu and select option 2 and that’s it.

You may notice get windows 10 app icon is already in the tray.Reserve your free copy of Windows 10, thank Microsoft, wait for the final launch and Enjoy!!Note:win10fix_full.bat makes few changes in Registry.Some anti-virus may flag win10fix_full.bat, but you are advised to consider it as false positive as many of people including me, followed this path.LindaJune 23, 2015 @ 12:01 amJust a note. I recently did a fresh install of windows 7 on to a new SSD and couldnt get the icon to show for love nor money, tried everything.Check to see if my windows had activated (click start menu right click on computer check windows activation) , it hadnt!Manually activated ran this scriptREG QUERY “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsUpgradeExperienceIndicators” /v UpgEx | findstr UpgExif “%errorlevel%” == “0” GOTO RunGWXreg add “HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsAppraiser” /v UtcOnetimeSend /t REG_DWORD /d 1 /fschtasks /run /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”:CompatCheckRunningschtasks /query /TN “MicrosoftWindowsApplication ExperienceMicrosoft Compatibility Appraiser”Powershell -Command “Get-ScheduledTask -TaskName ‘Microsoft Compatibility Appraiser’ -TaskPath ‘MicrosoftWindowsApplication Experience'” | Find “Ready”if NOT “%errorlevel%” == “0” ping localhost nul goto :CompatCheckRunning:RunGWXschtasks /run /TN “MicrosoftWindowsSetupgwxrefreshgwxconfig”and the icon showed instantly, just for people who may have done a reinstall and not checked, windows doesnt activate instantly when you reinstall but will still allow you to download all updates!!EdJuly 4, 2015 @ 11:04 pmI have the icon on my desktop and laptp, y problem is with my grandmas computer. She has an HP with windows 7 64 bit. I tried the windows update but it just runs “checking for update” without ever finding an update. I installed both the updates manually and looked in the installed updates but it is empty.

After I ran the microsoft updater fix and tried again but it still is stuck checking for updates. I ran both scripts and the method three file and that didn’t work either. I searched in the windofws file in C drive and there is no gwx file. I looked in the task schedule but it’s not their either. I dont know what to do for her, it shouldn’t be this hard… Any advice?Venkat eswarluJuly 13, 2015 @ 9:49 amIf you have the right version of windows and all the required software updates and none of the solutions above works, you can try this:Run taskschd.mscIn the left column open the folders: Task scheduler library/Microsoft/Windows/Setup/gwxRight click launchtrayprocess and open propertiestick the box for it to run with the highest permissions and click ok.then right click and run all 4 tasks in the folder.For me the icon to reserve windows 10 appeared immediately.ArtoJuly 17, 2015 @ 6:38 pmThanks Eirik, I tried for 4 hrs and at last this task scheduler worked out..Though the same method explained by some one but its not clear.. I am just pasting the same which worked to me..Run taskschd.mscIn the left column open the folders: Task scheduler library/Microsoft/Windows/Setup/gwxRight click launchtrayprocess and open propertiestick the box for it to run with the highest permissions and click ok.then right click and run all 4 tasks in the folder.For me the icon to reserve windows 10 appeared immediately.Bob WhiteJuly 17, 2015 @ 2:04 ami am sorry but even that method didn’t work i don’t know what is wrong i am sure i have all that is neccesary it just doesn’t work…but about 2 weeks ago the windows 10 icon did show and i entered my email and clicked on reserve but i had to reset my computer to factory setting ….so now my question is do i have to make that icon appear again in order to install windows 10 when it is released? or i still can install it as i have reserved it before via my email address , that is my last question i am again very greatful for your help.Venkat eswarluJuly 26, 2015 @ 6:38 amThis is what worked for me on win 7 ultimate sp1 after trying for hours to find a fix landed on this site using method 3 and downloading link run as administrator and when selection show up press 2 and voila the app icon appears click and send email confirmation then check your update and it will read Windows 10 upgrade reserved, and will let me know when it will be ready to install on my pc.

Thank you Venkat eswarlu of techdowsDaveJuly 30, 2015 @ 3:50 amI’m running Windows 8.1 OEM, and I’ve tried all methods without success. I’ve uninstalled and reinstalled both of the KB3035583 and KB2976978 files, restarted multiple times, tried all the task scheduling suggestions listed in previous posts, all to no avail. I’m really at my wits’ end now….I know I have all the updates installed as I’ve checked multiple times, and when running the batch file in Option 3 it confirms I have the key ones installed. The curious thing is when I run Microsoft’s GW10Appdiagnostic.diagcab file, the troubleshooter tells me it is incompatible with my version of Windows, and on the details page it tells me my version is not up to date.I KNOW it is up to date and I KNOW my copy is genuine. I have the CD right here in front of me! Please can anybody help me!!Venkat eswarluJuly 30, 2015 @ 12:52 pmJULY 31, 2015 PLEASE READ THIS:For those Who’ve not seen the Windows icon to reserveFollow THIS LINK or those people who’ve reserved and still no Windows 10 download started or happening,know this: You can wait patiently for the wave to reach you, Microsoft has pushed upgrade in waves in 190 countries, (that’s a massive amount of people).We don’t know how much time (could be hours or a day or days) it takes for you to be part of the wave, if you’re part of it, you’ll get it now or you could wait, you’ll get it definitely today or tomorrow or day after that.But if you want to install Windows 10 nowCheck this article which I also mentioned above really want you guys all commented here and reading this article to get upgrade to Windows 10 without any issues.I request users who’ve used this post to reserve or received any help from this site and upgraded successfully to Windows 10 share feedback in comments here, which is also helpful for other users and it makes me happy also.TiffJuly 31, 2015 @ 6:54 am

[Guide] How to Upgrade to Windows 8.1 from Windows 8, Windows 7, XP and Vista? .

How to Activate Windows 8.1 for Free . Windows Application Experience[Guide] How to Upgrade to Windows 8.1 from Windows 8, Windows 7, XP and Vista?Windows 8.1 has been released to public and Windows 8 users can update their computer systems to Windows 8.1 absolutely free.Download Windows 8.1 RTM NowIf you are using Windows 8 and want to upgrade to Windows 8.1, following instructions will help you:1. First of all go to Start Screen and click on Store tile to launch Windows Store.2. Now you should see a big tile containing information about Windows 8.1 update, just click on it.It'll launch Windows 8.1 download page, click on Download button.3. It'll take a few minutes in downloading and installing the required files. It might restart your system to finish the installation process.4. Once the setup process completes, you'll be asked to complete a few steps such as accepting the license terms, customize settings, creating user account, etc.Finally you'll have the brand new Windows 8.1 in your computer system.[Problem] You can't find Windows 8.1 update in Windows 8 StoreIf you can't find Windows 8.1 update listed in Windows Store, you should wait for a few hours. Since Microsoft released Windows 8.1 just a few hours back, it'll take some time to appear in all regions windows 8.1 activation via command line. So better to wait for a few hours until it appears in your country.If you can't wait or if the update doesn't appear even after waiting for some hours, check out following steps:1.

An update KB2871389 is required to update to Windows 8.1, so make sure this update is installed in your Windows 8 system.To check it, open Windows Update from Control Panel or Start Screen and check for new updates. If the update has not been installed in your system yet, Windows Update will automatically detect and download it.Alternatively, you can direct download and install the update using following links:Download KB2871389 Update for Windows 8 (32-bit)Download KB2871389 Update for Windows 8 (64-bit)Download KB2871389 Update for Windows Server 2012Once the update is installed successfully in your system, repeat the above mentioned steps to upgrade to Windows 8.1 through Windows Store. Now it should work without any problem.NOTE: If after installing the above mentioned update still you can't find Windows 8.1 update tile in Windows Store, try to launch the Windows 8.1 update page directly by executing following command from Command Prompt or RUN dialog box:ms-windows-store:WindowsUpgradeIt'll directly launch Windows 8.1 update page in Windows Store.PS: Also keep in mind that Windows 8 Enterprise edition, Windows 8 installed using KMS activation and Windows 8 installed using MSDN ISO and activated using product key which allows multiple activation, can't be upgraded to Windows 8.1 using Windows Store.Upgrade to Windows 8.1 from Windows XP, Vista or Windows 7If you are using Windows 7, you can upgrade to Windows 8.1 using Windows 8.1 Upgrade Assistant. The steps for Windows 8.1 upgrade would be same as Windows 8 upgrade, so you can check out following tutorial to learn how to use Upgrade Assistant to upgrade to Windows 8.1:How to Download or Order Windows 8 Setup DVD Online?If you are using Windows XP or Windows Vista, you'll need to perform a clean installation of Windows 8.1. You can't upgrade to Windows 8.1 from Windows XP or Windows Vista.Also Check:Fix Problems While Installing or Upgrading to Windows 8.1How to Download Windows 8.1 RTM Standalone Offline ISO for Clean Installation?Share this article: Facebook | Twitter | Google+ | Reddit | Tell a friendPosted in: Windows 7, Windows 8 / 8.1, Windows Vista, Windows XPOther similar articles that may interest youWindows 10 Free Upgrade for Windows 7 and Windows 8.1 Users[Fix] “No Signal” Issue on Tata Sky DTH Service in IndiaDownload Free Microsoft Office Apps for Android Mobile PhonesMicrosoft Announced Windows 7 SKU DetailsSecret Processor Trick to Improve System Performance in Windows Vista and Later[Fix] Bold and Italic Font Problem in WindowsCommentsernestis it available now I get an error on Microsoft's websitemacpro622776I'm downloading now through Windows Store but it keeps failing. I've downloaded about 2.55GB of the 3.42 GB download (for my computer) but it is able to resume thankfully. Although it now seems to fail every 1% or so. I'm assuming that the Microsoft servers are probably clogged full of users also wanting to download.

This could be your issue @ernest if you are already downloading.ngyikpThere is no KB2871839 update, I found out by some googling and stumbling upon a Chinese forum.The correct update is KB2871389.MEPS: Also keep in mind that Windows 8 Enterprise edition, Windows 8 installed using KMS activation and Windows 8 installed using MSDN ISO and activated using product key which allows multiple activation, can't be upgraded to Windows 8.1 using Windows how can we update to windows 8.1?BlasztaIs there any offline upgrade link for Windows 8.1 Pro ?JonathanHi VG, I've got a really specific question...I was experimenting with Dual-Boot, so I had to reinstall Windows when I was done. I used an OEM key from Dell to activate, then used my Media Center Key to upgrade. Afterwards, I was prompted that my key was already in use (On my First Windows install). I used SLUI 4 and Phone Activation to fix this. Will I be able to upgrade or not because of this?

I haven't checked yet because I am at work, but I don't want to be dissappointed when I go home.Bayui already update KB2871389 i wait for 8 hours and windows store not show me the update to 8.1 what should i do? waiting?AnkitNo Update shown in the windows Store..haven't it released in India?PratikHow to get offline update? That is download on one and install on multiple usingDVD/USB drive?PratikIn addition to above post, I have Windows 8 (OEM) pre installed on a laptop.GouravMy windows 8 PC doesn't seem to think that I'm connected to the internet even though I'm reading this article and writing this comment on the same PC. Any chance they have given a manual download link for the update?Also, I have a 256 kbps broadband, that means downloading this update will take almost 36 hours. So I would like to get it from somewhere else.VGGuys! Just wait for some time and there should be official offline download links available from [email protected] check out the second reply, the one by Charles from Oct. 2013, 10:03 GMTVG^^ It will. Microsoft has announced it earlier:One shift to note in Windows 8.1 is that we will be offering “full version software” at retail and online for download that does not require a previous version of Windows in order to be installed.

The copy of Windows 8 that is currently available for sale at retail and online is an “upgrade version.” This shift allows more flexibility for customers in specific technical scenarios and is in response to feedback we’ve received. It will be easier for those consumers who want to build PCs from scratch, run Windows 8.1 in Virtual Machine (VM) environments, or run Windows 8.1 on a second hard drive partition.Link: Do you need administrator permission to install Windows 8.1 from the Store? I'm guessing I do, but I want to make sure first.NegativeStill won't work for me, I have 8 Pro, but still can't see the upgrade, tried every fix and patch available but still cant see the damn thing...VG^^ Try the direct command to launch Windows 8.1 update page in Windows Store. Check the NOTE given above.@rcmeroI was able to upgrade Windows 8 with a normal user account created at the time of Windows 8 installation.Arjo GhoshHello Brother!Can I install Windows 8.1 Pro along with Windows XP SP3 Dual Boot?Arjo GhoshI currently have Windows XP SP3 with Windows 8 in my PC. Please suggest me how to make Windows XP available along with Windows 8.1. :)VG^^ Windows 8.1 will automatically detect Windows XP and you'll have a dual-boot system. Make sure to install Windows 8.1 on a different partition.Megah LimI have try to update from Windows 8 to Windows 8.1, they have kept almost every desktop programs, except that avast!

Free Antivirus is removed, please add this:NOTE: The following installed desktop programs is not kept:If you have some more research, update this page and list more.gordonfreeman125Question.Can i pause the download and continue it when i turn on the computer again and is there any increase in space?DaveFinally found the 8.1 update after using the command ms-windows-store:WindowsUpgrade .Thanks !Megah LimDon't be worried, Windows 8 users,Upgrade from Windows 8 to Windows 8.1 via Windows Store does not lose manufacturer's information. After upgrade to Windows 8.1, Manufacturer and Model retains in System Properties.PeteCan somebody please post a picture of what the store screen with Windows 8.1 download link looks like? I've been in that @#$ store many times now and I have to browse hundreds of irrelevant things all the time. I have no idea where to look Is it under 'productivity' or 'tools' or 'security' or even 'entertainment'? A search for Windows 8.1 gives me 122 offers *related to* Windows 8.1, but where the heck is Windows 8.1 itselfTiddlesIts in there, just keep looking mateadhityais there way to upgrade for kms activated os without formatingCoOl KinGI felt bad that I can't upgrade to Windows 8/8.1 directly from Windows 7 Ultimate. I Need to do clean installation because Upgrade option from Windows 7 Ultimate/pro/enterprise is only available for windows 8/8.1 pro. Why MS Did this? I don't need pro I don't want lose any Game preinstalled by HP.mussawircan somebody tell me why windows 8pro is not activate by dvd serial keyIggles1980I have all my Windows 8 Updates up to date and get the message No Important Updates At This Time when I click Check For Updates.When I go to the Store Screen to Update to Windows 8.1, it goes to the Installs Screen with the Icon and the Downloading Toolbar appears.

Seconds later, on the Installs Screen, the Windows 8.1 Icon stops and says that The app wasn't installed - view details. When I click View Details a box says Windows is getting your upgrade ready. You will be notified.Help.SarahThe download for windows 8.1 always begins but it never completes. Tired of trying now.SparshWill the drivers installed on windows7 will corrupt after installing win8 or win8.1 I've dvd of drivers supporting win7,.................will it work on win8.1 or will i have to install 'em seperately from netVG^^ The drivers should work. If they dont work, you can download the new drivers from manufacturer website or Windows Update.Connect with UsRSS feed | Email newsletterTwitter | Facebook | Google+ | YouTubeLatest Articles[Nightly Update] Firefox 46.0 Comes with New Tracking Protection FeatureRemix OS: Android Based Free and Portable Operating System for ComputersMiniTool Partition Wizard Giveaway Winners ListTruth Behind Disallowing Telemetry and Data Collection Trick in Windows 10[Review] Which DTH Service Provides Maximum HD Channels in India?[New Year Giveaway] 20 Free License Keys of MiniTool Partition Wizard Professional Edition[Fix] Can’t Open Bing, MSN, Outlook or Other Microsoft Websites in Windows 10[Fix] “This Connection is Untrusted” Problem with Google and Other HTTPS Websites in Mozilla Firefox

Creating a Non-Certified Windows To Go USB Drive .

*i*m*g*Windows To Go (W2G) is one of those topics that leaves everyone a little puzzled at first mention. The first question that comes to mind is, “Why would I want or need such a thing as W2G?” The second is, “How do I create a W2G USB drive?” Once you have the USB drive in hand – or in pocket – many other questions arise about licensing, portability, and security. In this article, I’ll answer all of your questions about Windows To Go on Windows 8.Certified USB DrivesThe list of Microsoft-certified USB drives for Windows 8 W2G is very short:Kingston DataTraveler Ultimate – US$ 50+Super Talent Express RCB – US$ 70Western Digital My Passport Enterprise – US$ 110Compared with the SanDisk Cruzer 32GB I used for this article – US$ 20 at a local discount store – they’re all very expensive.Not using a Microsoft-certified USB disk comes with a few, potentially deal-breaking shortcomings: It’s not an official Windows To Go image, and you don’t get your personal (purchased) apps or other personalizations on installation. Although you can install applications on the disk, you have to sync your purchased apps manually. What you do have is a fully functional Windows 8 system that’s bootable from the USB drive. If you’re using it as a portable desktop system, you have achieved your goal. If, however, you need a full, official W2G image with all of the features promised by a certified drive, then use the built-in Windows To Go Control Panel applet to create your masterpiece.

Here, I describe how to create Windows To Go on a budget.Setting Up the USB DriveWhether you already own a 32GB USB (or larger) drive or you purchase one new for this project matters little because you have to wipe it clean before use, so be sure Windows To Go is what you want on this drive before you start.To begin, insert the USB drive into a USB slot on your computer and open a Windows command prompt in Admin mode. To set up the USB drive, follow the Diskpart commands below. C: DISKPARTDISKPART LIST DISKDisk #Status Size Free Dyn Gpt-------- ------------- ------- ------- --- ---Disk 0 Online 298 GB 0 BDisk 1 Online 29 GB 0 BDISKPART SELECT DISK 1Disk 1 is now the selected disk.DISKPART CLEANDiskPart succeeded in cleaning the disk.DISKPART CREATE PARTITION PRIMARYDiskPart succeeded in creating the specified partition.DISKPART FORMAT FS=NTFS QUICK100 percent completedDiskPart successfully formatted the volume.DISKPART ACTIVEDiskPart marked the current partition as active.DISKPART EXITLeaving DiskPart...C:The preparative work on the USB drive is complete.Gathering the UtilitiesNow you need to download the Windows Automated Installation Kit (AIK) for Windows 7, named KB3AIK_EN.ISO. At 1.7GB, it’s a significant download, and you’ll have to use your Microsoft Account to download the file. You’ll also need this account to log in to your Windows To Go system, so if you don’t have a Microsoft Account, sign up now.After mounting the ISO, use 7Zip or a similar tool to open the NEUTRAL.CABfile and extract the F1_imagefile. Once extracted, rename F1_imageto IMAGEX.EXE. This is the ImageX Tool for Windows. (For more information on the ImageX Tool for Windows, use IMAGEX.EXE /?at a command prompt.)From your Windows 8 ISO or DVD, copy the SOURCESINSTALL.WIMfile to the same location you copied IMAGEX.EXE. I suggest creating a folder such as C:WIN2GOand placing those files and these instructions into it for future reference.

If you find W2G useful, you’ll want to repeat the process.Creating the W2G Bootable ImageBefore you continue, know your USB drive letter. For this demonstration, the USB drive is E:, so I would transfer the install image to the USB drive with the command: C:WIN2GO IMAGEX.EXE /APPLY INSTALL.WIM 1 E:This process can take a very long time. Mine took more than an hour to complete, so be patient and don’t assume anything is wrong. ImageX provides a progress indicator like this [ 30% ] Applying progress: 43:22 mins remaining.during the transfer process. When the image is fully transferred to the USB drive, you need to enter one final command to copy Windows boot files to the root of the bootable USB drive: C: BCDBOOT.EXE E:WINDOWS /S E: /F ALLBoot files successfully created.This command transfers the boot or system files to the USB Drive for any firmware (BIOS or UEFI) type ( ALL).Initial Boot and W2G SetupNow you’re ready to remove the USB drive and insert it into any other Windows 8-capable and USB-bootable computer to boot into Windows To Go. The initial setup process is lengthy, so be very patient. W2G requires two boots.

The first is to detect hardware, which takes you through a series of colorful screens that display messages such as Getting devices ready X%and Getting ready. The system will reboot itself, so be ready to boot from the USB drive on that second boot.The second boot steps you through the following Windows 8 setup screens:Accepting the License AgreementPersonalize Color Scheme and Name the ComputerSelect a Wireless NetworkEnter the Wireless Network PasswordSet Express or Custom SettingsSign In to Your PC (Enter a Microsoft Account Name )Enter Your Microsoft Account PasswordMouse SetupAfter you enter your information and personalize your computer, you have to wait through another series of fascinating screens, such as We’re getting your PC ready, Installing apps, Taking care of a few things, Almost ready finally, you’re sent to the Start (Metro) screen, where you can now interact with the operating system.Using Windows To GoYou’ll notice that W2G behaves almost exactly like Windows 8 in every respect, and it should, because it is a full Windows 8 installation. The two major exceptions that prevent me from saying it behaves exactlylike Windows 8 are: Windows Store is disabled and you’ll soon get a “nag” notification about Windows activation.You might see a notification when you first log in telling you to: Keep the USB drive plugged in. Only remove it after your PC has shut down completely. Otherwise, your Windows To Go workspace might crash and you could lose data.The W2G workspace is not loaded into memory and used from there it remains on disk and is accessed as you use it. Windows 8 also creates a pagefile, if needed, on the USB drive.Installing traditional applications, such as Microsoft Office, on W2G works just as you’d expect, but you need to open an Administrative command prompt and use The Group Policy Editor ( gpedit) to enable Windows Store.

C: gpeditTo enable the Windows Store, under Computer Configuration, open Administrative Templates | Windows Components | Store.In the right pane, right-click the entry Allow Store to install apps on Windows To Go workspacesand click Editto select the Enabledoption and click OK(Figure 1). Now you can close the Group Policy Editor.Figure 1: The Group Policy Editor with Windows Store Enabled.You should now be able to open the Windows Store and install apps. If you still have trouble, try connecting into your Active Directory (AD) domain with your W2G system and allow it to activate Windows. Activation and subsequent activiation checkups are required every 180 days. Remember that W2G is Enterprise-only therefore, to use it, you’ll need a KMS Server or AD to help you manage it.Surveying SecurityIt might come as no surprise to you that a Windows To Go implementation will force businesses that use the technology to change the way users work with Windows. The problem lies in the fact that when you boot up with a USB drive, you have access to local disk and device resources from the USB-based operating system.The solution to the problem is to enable BitLocker on all systems and BitLocker To Go on all Windows To Go-enabled devices.

If you boot onto a Windows system that has BitLocker enabled, you will not be able to view anything on the protected disk unless you have the password. Alternatively, if you happen to lose your W2G device, your information is safe if you have Bitlocker To Go set up on it otherwise, your information is available to anyone who can plug in a USB drive.For security professionals, W2G is an excellent way to gain easy access to any system’s files. The sly security pro will encrypt the USB drive with BitLocker To Go, just in case the device is left behind or lost. The recipient will have a nice $20 gift, but at least the identity and purpose of the drive will remain hidden.Managing PortabilityIf you use the x86 version of W2G, you’ll have greater portability than if you use the 64-bit version. Attempting to boot the 64-bit version on a system that doesn’t support it stops the boot, and the system notifies you that the process can’t continue. You can create a W2G-bootable USB drive successfully in a virtual machine.

I used VMware Workstation 9 to produce the one I used for the demonstration described in this article.Once the USB is booted and the Windows Store settings are changed, you can open the Windows Store, right-click any app, and click Your Appsto display your purchased apps. After selecting and purchasing an app from the Windows Store that you want to install on the W2G USB disk, you are licensed to use it on five computers. You can also sync your settings via your Microsoft account by opening the Charms Bar and clicking Settings | Change PC settings | Sync your settings. All settings are set to sync by default.Assessing System SpeedFor most operations, you’ll never know that you’re working from a USB disk and not a traditional hard disk. A few disk-intensive applications are a bit sluggish on startup, but all of the Office applications open within one to two seconds activate windows 8.1 enterprise command line. Overall, performance varies from acceptable to outstanding. Microsoft Access 2010, for example, opened immediately and without hesitation. Microsoft Word 2010 lagged by comparison at two seconds.SummaryWindows To Go isn’t for everyone.

In fact, I think it serves a relatively small demographic right now. At times it could be useful to the traveller, but most of us won’t need it. The security risks of using it are too great to the host computer, so its use will be limited in all but the most secure companies. W2G is interesting, however, from a purely technical point of view: Now Windows-oriented folks can use a complete, familiar operating system, just as Linux renegades have been doing for years.

SOLVED: Windows Can’t Be Activated Right Now 0x8007232b – Windows 8 .

How to Activate Windows 8.1 for Free . activate windows 8.1 enterprise command lineThe solution is to:click START (gets you to the tiles)type RUNtype slui 3 and press ENTERyes, SLUI: which stands for SOFTWARE LICENSING USER INTERFACESLUI 1 brings up the activation status windowSLUI 2 brings up the activation windowSLUI 3 brings up the CHANGE PRODUCT KEY windowSLUI 4 brings up the CALL MICROSOFT MANUALLY ACTIVATE windowType in your product keyHave a nice day.See the screen shots below.I just downloaded my Windows 8 Enterprise from Technet / MSDN, wiped the hard drive on my brand new Acer Timeline X, and installed it. I did the same thing with an identical Acer Time Line but on that unit, I had yanked the hard disk and installed a spanky new Kingston V200+ SSD. Both of these laptops had the same problems:When I tried to activate them they showed “ Windows Can’t Be Activated Right Now” DNS error 0x8007232bThere was no link to CHANGE THE PRODUCT KEYSLUI came out with Windows Vista and if you want more details you might find usefulFantie 10-05-15Diagnostic Report (1.9.0027.0):—————————————–Windows Validation Data–Validation Status: Validation unsupported OSValidation Code: 6Cached Online Validation Code: N/A, hr = 0xc004f012Windows Product Key:-*****-C97JM-9MPGT-3V66TWindows Product Key Hash: gmNDbvZQji7KOiUWbAAATBm+IY8=Windows Product ID: 00330-80000-00000-AA822Windows Product ID Type: 0Windows License Type: UnknownWindows OS version: N/A, hr=0x8007007aID: {067D8773-961D-424D-9DE9-CB47487147CB}(1)Is Admin: YesTestCab: 0x0LegitcheckControl ActiveX: N/A, hr = 0x80070002Signed By: N/A, hr = 0x80070002Product Name: Windows 10 ProArchitecture: 0x00000000Build lab: 10240.th1.150709-1700TTS Error:Validation Diagnostic:Resolution Status: N/AVista WgaER Data–ThreatID(s): N/A, hr = 0x80070002Version: N/A, hr = 0x80070002Windows XP Notifications Data–Cached Result: N/A, hr = 0x80070002File Exists: NoVersion: N/A, hr = 0x80070002WgaTray.exe Signed By: N/A, hr = 0x80070002WgaLogon.dll Signed By: N/A, hr = 0x80070002OGA Notifications Data–Cached Result: N/A, hr = 0x80070002Version: N/A, hr = 0x80070002OGAExec.exe Signed By: N/A, hr = 0x80070002OGAAddin.dll Signed By: N/A, hr = 0x80070002OGA Data–Office Status: 111 Unsupported OSOGA Version: N/A, 0x80070002Signed By: N/A, hr = 0x80070002Office Diagnostics:Browser Data–Proxy settings: N/AUser Agent: Mozilla/4.0 (compatible MSIE 8.0 Win32)Default Browser: C:Program FilesGoogleChromeApplicationchrome.exeDownload signed ActiveX controls: PromptDownload unsigned ActiveX controls: DisabledRun ActiveX controls and plug-ins: AllowedInitialize and script ActiveX controls not marked as safe: DisabledAllow scripting of Internet Explorer Webbrowser control: DisabledActive scripting: AllowedScript ActiveX controls marked as safe for scripting: AllowedFile Scan Data–File Mismatch: C:WINDOWSsystem32licdll.dll[Hr = 0x80070002]File Mismatch: C:WINDOWSsystem32oembios.bin[Hr = 0x80070002]File Mismatch: C:WINDOWSsystem32oembios.dat[Hr = 0x80070002]File Mismatch: C:WINDOWSsystem32oembios.sig[Hr = 0x80070002]Other data–Office Details: {067D8773-961D-424D-9DE9-CB47487147CB}1.9.0027.0?32*****-*****-*****-*****-3V66T00330-80000-00000-AA8220S-1-5-21-3961427786-2044308948-3680924143BIOSTAR GroupG41D3CAmerican Megatrends Inc.080015 20110824000000.000000+000CDB80600018400F808090809Pacific Standard Time(GMT-08:00)03111N/A, hr = 0x80070424Windows Activation Technologies–N/AHWID Data–HWID Hash Current: MgAAAAAABAABAAEAAgABAAAAAQABAAEAJJTwskjkqnbMBoCfahO8tBACGoAWUvZKRso=OEM Activation 1.0 Data–N/AOEM Activation 2.0 Data–BIOS valid for OA 2.0: yes, but no SLIC tableWindows marker version: N/AOEMID and OEMTableID Consistent: N/ABIOS Information:ACPI Table NameOEMID ValueOEMTableID ValueMCFG 082411 OEMMCFGFACP 082411 FACP1515APIC 082411 APIC1515OEMB 082411 OEMB1515GSCI 082411 GMCHSCISSDT DpgPmm CpuPmIan Matthews 08-29-15Hi Ho I do not run a single KMS server as I have refused. After I call MS and demand a MAK key, they ALWAYS provide one. This is because several users in all of my clients can be off the LAN for more than 6 months at a time and if they are in and a KMS activation, their Windows will fail. IMHO, key management is purely a Microsoft problem and I will not let them off the hook for it.HOWEVER, to answer your question, I would suggest you call MS support as I believe KMS support is available at no cost.Will Raresheid 01-25-15Just a different scenario but this same thing occurred to me with Windows 10 preview after a refresh. I have a small domain that is not on the internet (domain.something) on a private IP.

My DNS server is not exposed so hence the error. Remove the PC from the domain, it activates by itself on reboot, then rejoin domain. I realize this is not a typical situation but it can happen. It’s that error that got me to this page and when I realized the agony of listening to that ‘OK! Let’s get started’ guy at the Microsoft phone-in activation it shifted my brain right into gear. Thanks.Elizabeth 06-12-14I LOVE YOU SO MUCH.

This activation problem has been bothering me for several month (for some reason my asus had windows 8 yet it wasn’t activated) so here I am, finding your website months later and it worked, along with another place that suggested downloading a product key finder. Now I can customize my computer instead of having to look at the disgusting custom lock screen and I don’t have to be bothered with a blue popup screen disturbing my work and telling me to update windows. It was such a pain. Thanks again mate.Ian Matthews 09-15-13That means you are trying to use a corporate key. KEY MANAGEMENT SERVICE is Windows Activation Service for companies. The idea is, companies can have their PC’s activate inside the company to a KMS server and that KMS server periodically reports back to Microsoft’s activation systems to make sure all is as expected. KMS keys have exactly the same format as standard keys but they only activate against KMS servers.

If you are a company and you have been given KMS keys but do not want to run a KMS Server, you can call Microsoft and they WILL issue you standard keys.

Piracy .

How to Activate Windows 8.1 for Free . activate windows 8.1 kms command lineyou could do a complete backup of your windows 10 installation. then clean install windows 7, activate with DAZ, and upgrade install 10. at this point make sure windows 10 is reporting as activated. if it's activated restore your previous windows 10 backup and use the following commands in the command prompt: slmgr /ipk W269N-WFGWX-YVC9B-4J6C9-T83GXslmgr /atoyou should get a message saying the product activated successfuly. then run: slmgr /dlvand ensure it is reporting retail channel and that it is, in fact, activatedpermalinksaveparentreportgive goldreplyI also had my system with a Volume:MAK channel key so I went about setting up a windows 7 virtual machine that I could update to windows 10 and then transfer the key over. To make it easy to move the keys and backup my current ones I was going to use Windows Toolkit 2.6 Beta 1. I ended up clicking on the Product Keys tab and Check System. It showed that there were 2 keys, one was labeled Retail and the other was the Volume:MAK. Since I backed-up my keys I decided to try just entering the Retail key. Someone else posted these steps so I followed them and just replaced the XXXXX's with the Retail key that I found.Try these commands from an elevated command prompt. (Note: You may have to run these commands as cscript slmgr.vbs rather than just being able to enter slmgr.) slmgr /ckmsThis command clears the KMS host info from the system.

Next do slmgr /upkThis removes all licensing from the system and will return it to a trial state! slmgr /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXXThis installs your new, valid, legal key.Finally, activate the new key: slmgr /atoAll I had to do was remove the second part of the key and it changed my system to retail so now I have an extra key that I created in my virtual machine.permalinksaveparentreportgive goldreplyMicrosoft is aware of pirated copies of Windows being allowed to upgrade to Windows 10 and gain legitimate activation.Based on the fact that Microsoft was aware of this long before the release of Windows 10 on July 29th 2015, it obvious Microsoft has permitted this.The Windows 10 activation status is stored on the internet on Microsoft's servers. CD-Keys/Serial numbers are no longer how Microsoft will be licensing their OS. Licenses are now tied to the machine's hardware.You can confirm this by completely formatting an activated Windows 10 machine, then fresh installing from the ISO. Upon connecting to the internet you will have activated status.The best way to obtain activated status is to install Windows 7 32/64 Professional or Ultimate as Legacy (MBR). Installing DAZ's Loader version 2.2.2 to activate.

Then upgrading to Windows 10 Pro from the Windows 10 ISO. If you wish to use UEFI boot for Windows, you can format the HDD as GPT and reinstall Windows 10.If you do not want to format you can convert the HDD partition style from MBR to GPT using tools like Minitool Partition Wizard Free v9 or Linux's gptfdisk, though this is only for advanced users who understand exactly how the Windows boot chain works, who know the difference between UEFI and Legacy BIOS, and who know what a BCD is and does on Windows and additionally how to create/modify a BCD.permalinksavereportgive goldreply

Kaspersky Anti-Virus 2015 .

*i*m*g*We recommend that you do the following before starting the installation:Make sure your computer meets the system requirements for Kaspersky Anti-Virus 2015.Check if there are other Kaspersky Lab products or incompatible anti-virus software from other vendors.If you have incompatible software from another vendor or another Kaspersky Lab product installed on your computer, remove it.Close all running applications.If you are installing Kaspersky Anti-Virus 2015 on Windows 8 or 8.1, then switch to the Desktop by clicking on the respective button in the Modern UI interface.If you purchased a retail version of Kaspersky Anti-Virus 2015 (on a CD) and the installation started automatically after you have inserted the CD into the drive, skip to the Step 2.If you purchased Kaspersky Anti-Virus 2015 online or the installation CD did not start, go to the Step 1 of the instruction below. Installing the applicationStep 1. When you buy Kaspersky Anti-Virus 2015 in an Internet store, you get a link to the installation file which needs to be launched manually. Manual start is also needed if for some reason the Kaspersky Anti-Virus 2015 installation CD did not start automatically.Download the application installer by following a link provided by your online store, or find it on the Kaspersky Lab website. For instructions on how to download a file, click a link that refers to your operating system:Windows 8 / 8.1Windows 7Windows VistaStep 2. Run the downloaded file. The installation wizard's welcome screen will appear.We recommend that you participate in the Kaspersky Security Network program. Participation in the program entails sending information to Kaspersky Lab, which includes sending information about new threats detected on your computer, a unique identifier associated with your computer for Kaspersky Anti-Virus 2015, and some information about your system. We guarantee that no personal information will be sent.

Please click the respective link in the wizard's window and read the Kaspersky Security Network statement. Leave the check box selected if you accept the statement.By clicking the Install button, you accept the terms of the End User License Agreement. Please click the respective link in the wizard's window and read the agreement carefully before installing the product.If you are installing the application under Windows Vista 7, Windows 8, or Windows 8.1, you may see a notification from the User Account Control (UAC) service after you click the Install button. To proceed with the installation, enter your administrative password and click Yes in the User account control window.Step 5. Wait until the installation is complete.Step 6. Make sure that the check box Run Kaspersky Anti-Virus is selected and click the Finish button to complete the installation of Kaspersky Anti-Virus 2015.After you have installed and run the application, activate the commercial version of Kaspersky Anti-Virus 2015.To install Kaspersky Anti-Virus 2015 from the command prompt, follow these steps:Download the application installer by following a link provided by your online store, or find it on the Kaspersky Lab website. For instructions on how to download a file, click a link that refers to your operating systemWindows 8 / 8.1Windows 7Windows VistaRun the command line interface:Windows XP/VistaWindows 7Windows 8 / 8.1Place the installer icon into the command line interface by using drag-and-drop.

The installer files' path will appear in the command line.In the command line, type a command to run the installer, with the necessary parameters and options (see Command line installation parameters and properties).Run the command by pressing the Enter key. The Kaspersky Anti-Virus 2015 installation will start with the parameters applied.By following the wizard's instructions, complete the Kaspersky Anti-Virus 2015 installation. Command line installation parameters and propertiesInstallation parameters:Main parameters:/s — non-interactive (silent) mode without displaying dialog boxes.Example:KAV15.0.0.463.en-US.exe /s/p= serves for applying options for installation.Example:KAV15.0.0.463.en-US.exe /pALLOWREBOOT=1 /pSKIPPRODUCTCHECK=1/h opens a help dialog box.Advanced parameters:/a denotes administrative installation when installation files are copied to a specified network folder.Example:KAV15.0.0.463.en-US.exe /aZ:Kaspersky Lab/sendstat sends statistics in the silent mode if /pAGREETOEULA=1./noreboot blocks the dialog that requires that the computer should be restarted after the installation has been successfully completed./t defines the path to the file with the installation log./g defines the detalization level of the installation log (possible values: {1, 2, 3}, where 1 is the least detailed)./l defines the language used while the multi-language version is being installed./x starts the product removal.Example:KAV15.0.0.463.en-US.exe /xService command line properties (for authorized use only)Most significant installation properties:ACTIVATIONCODE= is meant for applying an activation code.AGREETOEULA indicates the user's consent to the License Agreement.JOINKSN indicates the user's consent to participate in Kaspersky Security Network.INSTALLDIR= specifies the installation folder.Example:KAV15.0.0.463.en-US.exe /pINSTALLDIR=C:Documents and SettingsAdministratorkav2015KLPASSWD= is meant to protect some functions of the product with a password.Example:KAV15.0.0.463.en-US.exe /pKLPASSWD=12345678If the value of the parameter KLPASSWDAREA is not set, it will be applied to the default scope:Making changes to the application's settings.Closing the application.KLPASSWDAREA=[scope] defines the scope of the password specified by the option KLPASSWD. The possible values are:SET — making changes to the application's settingsEXIT — closing the applicationUNINST — removing the application.The option may have multiple values in such case, the values are divided by a semicolon.Example:KLPASSWDAREA=SETEXITUNINSTSELFPROTECTION=1 enables the product's self-defense.Example:KAV15.0.0.463.en-US.exe /pSELFPROTECTION=1ALLOWREBOOT=1 allows restarting the system if it is necessary.Example:KAV15.0.0.463.en-US.exe /pALLOWREBOOT=1SKIPPRODUCTCHECK=1 skips checking for applications incompatible with Kaspersky Anti-Virus 2015.Example:KAV15.0.0.463.en-US.exe /pSKIPPRODUCTCHECK=1By using the pSKIPPRODUCTCHECK=1 parameter, you assume responsibility for the possible consequences of the Kaspersky Lab product's incompatibility with other applications.The check is not performed only for the products that are always detected but not removed automatically by Kaspersky Anti-Virus 2015 (such software must be removed manually).Example. The command KAV15.0.0.463.en-US.exe /pALLOWREBOOT=1 /pSKIPPRODUCTCHECK=1 allows a computer restart and skips incompatible software scan during the installation of Kaspersky Anti-Virus 2015.If you purchased a retail version of Kaspersky Anti-Virus 2015 on a CD, but your computer has no drive to read it, follow these steps to install the application:Download the Kaspersky Anti-Virus 2015 installer from the Kaspersky Lab website.

For instructions on how to download a file, click a link that refers to your operating system:Windows 8 / 8.1Windows 7Windows VistaInstall Kaspersky Anti-Virus 2015.Activate Kaspersky Anti-Virus 2015 with a commercial activation code. You can find the activation code for the retail version on the first page of the Quick Start Guide.For File Servers Endpoint Security 10 for WindowsEndpoint Security 8 for WindowsAnti-Virus 6.0 R2 for Windows ServersAnti-Virus 8.0 for Windows Servers EEAnti-Virus 8.0 for Linux File ServersAnti-Virus 5.7 for Novell NetWareFor Mail and Collaboration Servers Secure Mail GatewaySecurity 9.0 for Microsoft Exchange ServerSecurity 8.0 for Microsoft Exchange ServerSecurity 9.0 for SharePoint ServerSecurity 8.0 for SharePoint ServerSecurity 8 for Linux Mail ServerAnti-Spam 3.0Mail Gateway 5.6Anti-Virus 8.0 for Lotus DominoFor Virtual Environments Security for Virtualization 3.0 | Light AgentSecurity for Virtualization 3.0 | AgentlessSecurity for Virtualization 2.0 | AgentlessSecurity for Virtualization 1.1 | Agentless

Geoff @ UVM .

*i*m*g*[ UPDATE: Removed Vista info: instead of troubleshooting Vista, upgrade it.]Here are some troubleshooting steps — for my future reference as much as anyone else’s — for for gathering information for diagnosing and resolving Windows KMS client activation issues. Quick Fix: Try this first!Most Windows activation issues I’ve encountered are resolved by entering the appropriate product key (not a secret see footnote): Windows 7 Enterprise Volume: 33PXH-7Y6KF-2VJC9-XBBR8-HVTHH Windows 8 Enterprise Volume: 32JNW-9KQ84-P47T8-D8GGY-CWCK7 Windows 8.1 Enterprise Volume: MHF9N-XY6XB-WVXMC-BTDCT-MKKG7 Windows 10 Enterprise Volume: NPPR9-FWDCX-D2C8J-H872K-2YT43Enter the code above and attempt to reactivate. If it works, you should be all set. If it doesn’t, the following steps will help identify the issue. Gathering Information.Gathering data is essential to fixing problems. If you ask me (or other IT staff) for help with Windows activation, the first thing I will ask from you is the output of the commands below.I recommend opening a text editor and copying all the commands and output into a file, which you can send to us if you need additional help resolving the activation issue.NOTE: All these steps require running commands from a console window (cmd.exe), which you may need to run As Administrator.

These commands work in Windows 7, 8 and 8.1.1. Run ipconfig /all to capture current IP configuration information.This could tell us whether the system is in a netreg-ed subnet and needs to register at or if there are other basic network configuration problems. We really just need the Ethernet adapter, assuming that’s what is being used to connect the system to the network. We don’t need all the additional tunneling adapters, etc. If someone is using a wireless adapter, possibly with the VPN client, then info about those adapters also should be captured.2. Run a DNS query to make sure the system. (Note the space between srv and _vlmcs):C: nslookup -q=srv _vlmcs._tcpThis command should return our campus KMS info [ 1] :Server: ns1.uvm.eduAddress: SRV service location:priority = 0weight = 0port = 1688svr hostname = nameserver = nameserver = internet address = AAAA IPv6 address = internet address = internet address =

Capture licensing status with slmgr.vbsThis command changes the default script host to cscript, so that output will go to the command prompt instead of a pop-up dialog box.C: cscript /h:cscriptThen capture the output ofC: slmgr.vbs -dlvOn a system where activation is working, the output should resemble the following:Microsoft (R) Windows Script Host Version 5.8Copyright (C) Microsoft Corporation. All rights reserved.Name: Windows(R) 7, Enterprise editionDescription: Windows Operating System – Windows(R) 7, VOLUME_KMSCLIENT channelPartial Product Key: HVTHHLicense Status: LicensedVolume activation expiration: 258900 minute(s) (179 day(s))Key Management Service client informationClient Machine ID (CMID): [long string]KMS machine name from DNS: machine extended PID: [long string]Activation interval: 120 minutesRenewal interval: 10080 minutesKMS host caching is enabledCapturing these pieces of information is important in helping us identify whether there’s a problem with a machine or two, a systemic problem that affects many people, or even an infrastructure failure. Resolving Problems1. IP configuration.This volume licensing process depends on a regular functioning connection to the campus network. Without this connectivity, a system’s activation will expire, leading to reduced functionality mode prior to Service Pack 1, and annoying out-of-compliance non-genuine warnings if the system has SP1.So regular network troubleshooting steps may come into play. If a system is going to be off site for extended periods of time, we have another mechanism that we can use to provide a perpetual (non-expiring) license.2.

DNS query doesn’t return valid KMS informationIf the information is missing or incorrect, the client system won’t know where to go to obtain an activation. Since Windows volume license 2.0 requires periodic renewal of the activation, this issue should be addressed, or the activation will fail in the future.A quick fix, though, is to tell Windows what server to use, thusly:C: slmgr.vbs -skms the client system can resolve that name to the right IP. And then force an activation attempt:C: slmgr.vbs -atoBut if client does correctly receive the DNS response and still can’t activate, other things to could be going on…3. Problems with license configurationI have seen situations where the “slmgr.vbs -dlv” shows an unlicensed Retail version of Windows (i.e., the description of the version of Windows includes the text “RETAIL channel”) rather than a volume license as shown above.By running “slmgr.vbs -dlv all”, you can review the status of many (all?) the different possible license options for this installation of Windows. Examine the VOLUME_KMSCLIENT channel entry, which on a working system should resemble the output in step 3 of the Gathering Information above. Instead, you may see, for example that the “VOLUME_KMSCLIENT channel” entry looks something like this:Name: Windows(R) 7, Enterprise editionDescription: Windows Operating System – Windows(R) 7, VOLUME_KMSCLIENT channelActivation ID: [long string]Application ID: [long string]Extended PID:Installation ID:This license is not in use.License Status: UnlicensedTo fix this, you need to install the generic product key for KMS volume activation ( again, not a secret. It’s available from MS [ 2] ). You can do this using the “enter a new product key” option from the RFM window, from the System properties/control panel, or from an elevated command prompt, like so: [Win7] c: slmgr -ipk 33PXH-7Y6KF-2VJC9-XBBR8-HVTHH [Win8] c: slmgr -ipk 32JNW-9KQ84-P47T8-D8GGY-CWCK7 [Win8.1] c: slmgr -ipk MHF9N-XY6XB-WVXMC-BTDCT-MKKG7Then force activationslmgr -atoIf this still results in an error, please save the output of all these commands in a file and attach it to a footprint ticket.–Geoff[ 1] KMS service info: 2] Volume license keys are listed at They activate against a license server (kms) that we enable with a private license key.

No sensitive keys have been divulged in the creating of this document.

Common Deployment Options and Methods¶ .

How to Activate Windows 8.1 for Free . activate windows 8.1 command lineStreamlining deployments ¶During an Acrobat non-silent install, the installer displays a number of screens which guide the user through the process and allow for licensing as well as the customization of certain features. Since admins typically use silent installs for mass deployments, Adobe provides methods for pre-deployment configuration. These tasks include:Licensing.Disabling registration.Granting activation exceptions for offline users.Selecting a language.Disabling the startup splash page.Setting a default PDF viewer when Acrobat or Reader is already present.Accepting the EULA on behalf of your organization.By performing these tasks ahead of time, you can simplify the end user experience when the product first launches.Configuration methodologiesConfiguration methods and tools include the following:A Customization Wizard for Windows and Macintosh provides a GUI way to modify the installer.Windows properties allow command line control.Registry and plist preferences enable pre and post deployment configuration.Support for APTEE for Windows (11.0 and later) and Macintosh (10.0 and later) provides for serialization, suppressing registration, and accepting the EULA.Not all methodologies are created equal. For example, the Windows Wizard sets properties, but there are many Adobe properties that must be set via the command line. While numerous properties map to registry and plist settings, the 500+ documented registry/plist preferences provide more granular options.

Configuration methodologies ¶Feature Win Wizard Mac Wizard Reg plist Adobe Property (Win) APTEE (Mac) Language Yes No Yes Yes Yes Splash page No No Yes No No PDF Viewer Yes No Yes Yes No EULA Yes Yes Yes (browser only) Yes ** Yes Licensing Yes Yes No Yes Yes Registration Yes Yes No No *** Yes Activation Yes (except for imaged OS) Yes No Yes Yes** For 11.x products, suppressing the EULA on Mac can only be accomplished via the Wizard or the PRTK tool. Setting the plist preference directly does not work.*** While there is a property for suppressing registration for 11.x and earlier, DC installs require using the Wizard or the PRTK tool.Language selection ¶For 11.0, all Acrobat installers are multi-language installers. Earlier product versions provided language-specific installers. Language configuration can be complex in some environments. For example, you may need to know the following:The relevant locale and language codes for your serial number.What languages to install on the machine (one, several, or all).Whether or not the default language is that of the OS.Whether or not the user should be allowed to reset the language.Whether the language variant maps to a differently named base MST.If you need additional font packs which are available as separate installers.At it’s simplest, set SUPPRESSLANGSELECTION (introduced in 11.0) to set the default language to match that of the OS. For additional details, see the language topics in Administration Basics as well as preferences such as bUseMUI in the Preference Reference.MSIs and Abcpy.ini ¶Installations that use MSI files require that the Abcpy.ini file contain the serial number information for the application. For example, during an administrative installation point deployment, the MSI file reads Abcpy.ini to get the needed information. If you have not used the Wizard, set this up manually as follows:Open Abcpy.ini in a text editor.Find ISX_SERIALNUMBER.Add the serial number.Save and close the file.Verify abcpy.ini is located in the same directory as the MSI prior to installation.EULA acceptance ¶Most admins accept the EULA on behalf of their organization so that end users do not have to perform that manual task.

To do so, do one of the following:Use the Wizard. If you are imaging an OS, run APTEE first to provide the activation exception.Run the EULA_ACCEPT property during installation.Browser only: Set EULAAcceptedForBrowser.Note that registry preferences have limited options, especially for Acrobat or for machine-level configuration. Therefore, the recommendations are as follows:Reader (per user): Set the registry preference EULA.Reader (all users): Use the Wizard or the EULA_ACCEPT property.Acrobat (per user): Can only accept the EULA for the browser plugin via EULAAcceptedForBrowser.Acrobat (all users): Use the Wizard or the EULA_ACCEPT property.Activation workflow details ¶ Windows workflow details ¶Goal 11.0 10.0 No activation exception No activation exception employed. Every end user will have to be online to complete the serial number validation after successful silent activation ping. Offline grace period expires after 30 days.

Activation is attempted. Product continues to work even if a connection to Adobe servers is not established. Activation exception via Wizard (other than an imaged OS) Online access required. The Wizard validates the serial number and saves the exception inside the MST. Activation is not required and serial numbers do not ping online. Activation exception via APTEE. Installer on a shared server. Install may be UI based.

Required for an imaged OS. Online access required. The APTEE tool runs, validates the serial number online, and on success, provides a prov.xml exception file that may be used as described in Activation exception 2. Activation is not required and serial numbers do not ping online. Activation exception via command line. Installer on a shared server.

Install may be UI based. Set the PRESERIALIZATIONFILEPATH property to point to a prov.xml file. Activation is not required and serial numbers do not ping online. Activation exception when installer runs on a DVD Online access required. For retail and volume licenses, the Adobe Application Manager (AAM) displays the short code for an activation request. Users log in to the Adobe website with an Adobe ID and enter the serial number and request code. After validation, the activation service displays a response code.

The user enters the code in the AAM screen. On success, AAM grants the activation exception. Activation is not required and serial numbers do not ping online. Command line trial install Activation is required. After any deployment method, registration with an Adobe ID is required. All end users see a Registration dialog. Activation is not required.

Adobe ID is not mandatory. License a trial install with activation Serialize by running APTEE with administrator privileges on all user machines (run over command line with appropriate parameter set to S/N). Serialize by using APTEE on all machines via command line. License a trial install with activation exceptionOnline access required.Run APTEE as described in Activation exception 2.Set the PRESERIALIZATIONFILEPATH property to point to a prov.xml file. Run APTEE as described in Activation exception 2.Activation behind proxys ¶For users behind an authenticating proxy, registering the product via the default HTML screens is not possible, thereby blocking trial and subscription workflows that require entering an Adobe ID. Customers who are installing trials or subscriptions should authenticate using Flex-based screens which must be enabled manually.

The process involves creating an override file and using the Wizard to install it in a specific location.To enable the Flex screen:Create a file named application.xml.override. The name must be exact and not have a .txt extension.Copy and paste the following lines in to the file:1Download and install Adobe Customization Wizard for XI.Download the Acrobat installer to a location which is writable by non-privileged users.Open the AcroPro.msi with the Wizard.In the left-hand pane, choose Files and Folders. The screen changes to a screen with a Modify and Summary tab.Choose Modify.In the lower left window for the Destination Computer, choose ProgramFileFolder Adobe Acrobat 11.0 Acrobat AMT. The lower right rectangle will show three files: aul.xml, application.xml, and SlConfig.xml.Drag and drop the application.xml.override file into this rectangle.Choose Save.Exit the Wizard.Install Acrobat using the customized installer.Once complete, the installer processes the override file and always displays the Flex screens when needed.Language selection ¶For 11.0, all Acrobat installers are multi-language installers. Earlier product versions provided language-specific installers.

Language configuration can be complex in some environments. For example, you may need to know the following:The relevant locale and language codes for your serial number.What languages to install on the machine (one, several, or all).Whether or not the default language is that of the OS.Whether or not the user should be allowed to reset the language.Whether the language variant maps to a differently named base MST.If you need additional font packs which are available as separate installers.At it’s simplest, let the default behavior set the language to match that of the OS. For additional details, see the language topics in Administration Basics as well as preferences such as UseMUI in the Preference Reference.Activation workflow details ¶ Macintosh workflow details ¶Goal 11.0 10.0 No activation exception No activation exception employed activate windows 8.1 command line. Every end user will have to be online to complete the serial number validation after successful silent activation ping. Offline grace period expires after 30 days.

Activation is not required and serial numbers do not ping online. Activation exception via Wizard (other than an imaged OS) Online access required. The Wizard validates the serial number and saves the exception inside the installation pkg. Activation is not required and serial numbers do not ping online. Activation exception via APTEE. Installer on a shared server.

Install may be UI based. Required for an imaged OS. Online access required. Run APTEE as described in Activation exception 2. Activation is not required and serial numbers do not ping online. Activation exception via command line. Installer on a shared server.

Install may be UI based. Use the Wizard or run APTEE as described in Activation exception 2. Activation is not required and serial numbers do not ping online. Activation exception when installer runs on a DVD Online access required. For retail and volume licenses, the Adobe Application Manager (AAM) displays the short code for an activation request. Users log in to the Adobe website with an Adobe ID and enter the serial number and request code. After validation, the activation service displays a response code. The user enters the code in the AAM screen. On success, AAM grants the activation exception.

Activation is not required and serial numbers do not ping online. Command line trial install Activation is required. After any deployment method, registration with an Adobe ID is required. All end users see a Registration dialog. No trials on Macintosh License a trial install with activation Serialize by running APTEE with administrator privileges on all user machines (run over command line with appropriate parameter set to S/N). No trials on Macintosh License a trial install with activation exception Online access required.

Run APTEE as described in Activation exception 2. No trials on MacintoshTrials for Acrobat Pro ¶Trials are only available for Acrobat Professional. Acrobat Standard does not offer trials. 11.0 introduced trials for Macintosh. An Adobe ID is required to install a trial.Sometimes it may be expedient to install the product without a serial number. For example, when creating a disk image for trial use or when you don’t know how many seats you may eventually need.

To do so, install the product without a serial number prior to creating your image. If you do not pass a serial number via one of the supported methods, a trial version of the product is automatically installed.For information about migrating a trial to a licensed version, see Licensing trials.The workflow is generally as follows:adobe_prtk --tool=VolumeSerialize --generate --serial=--leid= [--regsuppress=ss] [--eulasuppress][--locales=limited list of locales in xx_XX format or ALL][--provfilepath=]Note the following:This method can only be used with volume licenses.Acrobat need not be installed to run this command.The machine on which this command is run must be online.It is highly recommended to suppress registration.Install Acrobat on the master image. Do no launch the product.On the master image, copy the prov.xml file created at step 1.Create a permanent activation exception for Acrobat:

Design Source .

*i*m*g*How To Change Your Key And Activate Windows 8 EnterpriseHow To Change Your Key And Activate Windows 8 Enterprise -How to change windows 8 enterprise rtm product key and, Now, if you’ve 11 minutes to view this silent screencast (choose 720p hd full-screen playback for clarity), to see yourself the standard windows 8 enterprise rtm.How to change the windows-8 and 8.1 activation key to, Activation windows 8.1 enterprise change kms key to retail? windows 8 prefessional key and conffirmation id offline activation? how to put change the product id.Product key number - change in windows 8, You can only use a product key number for the same windows 8 edition that you currently have installed. for example, you cannot enter or change the product key number.Activate-windows-8-1-rtm-using-legit-windows-8-key-tutorial/, How to activate your windows 8.1 rtm using legit windows 8 key [tutorial].How to use command line to change/activate mak product key, Technet blogs » your office solution here » how to use command line to change/activate mak product key for office 2010 installation?.How To Change Your Key And Activate Windows 8 EnterpriseHow To Change Your Key And Activate Windows 8 Enterprise -How To Change Your Key And Activate Windows 8 Enterprise -Windows 10 product key home, pro, enterprise - how to change, How to change windows 10 product key home, pro, enterprise versions to activate (genuine and tested) is described here..Change windows 8 product key after install - objectsharp, After i've installed windows 8 rtm, i tried to activate it as good folks at microsoft are telling you too. when i clicked on activate button, windows activation.Change windows product key after install -, Do you need to change your product key so you can activate windows vista, windows 7, windows 8 or windows 10? there are two methods that will help you easily change.How activate windows 8.1 pro and windows 8.1 enterprise, This tuts is on how to activate your windows 8.1 pro / enterprise!.Trick you can also change the edition from Enterprise to Windows 8 ...How To Change Your Key And Activate Windows 8 Enterprise :)26437d1376770422-activate-windows-8-online-activate_8.1_pc-settings-2 ...How to install and activate windows 10 using your windows, How to install and activate windows 10 using your windows 7 or windows 8 product key.Windows 8.1 enterprise: update activation (mak to kms, [return to the windows 8: lsu overview] general information. doing these steps will update the activation method that windows uses to authorize the.How to change windows 10 product key - youtube, Want to watch this again later? sign in to add this video to a playlist. changing the windows 10 activation key is actually a lost easier than you think.How to change user account picture in windows 8.1/8 (login, How to activate windows 8.1 to change the account picture? prevent change account picture windows 8.1? how we change the user photo in windows 8.1 without activation?.Video with How To Change Your Key And Activate Windows 8 Enterprise

How to create a bootable Windows 8.1 USB drive .

How to Activate Windows 8.1 for Free . activate windows 8.1 command promptIn keeping up with tradition, Microsoft has launched Windows 8.1 in both digital and physical form. Users can install the new operating system by using either a downloaded ISO file or the provided DVD. But what happens when neither option is right for you? You can use a USB drive.There are a number of major benefits to using a USB drive for this process. It's compatible with virtually every device that is meant to run Windows, forgoes the need to have a spare DVD and the burner around and is much easier to store and carry with you wherever you may go.

A USB drive can also be faster than any DVD, shortening the time needed for the install, and, chances are, you probably already have one lying around. Also, compared to ISO files which can only be leveraged from Windows, USB drives can be used with no software installed on the device.RequirementsTo create a bootable Windows 8.1 USB drive you will need the following:4 GB or larger USB driveWindows 8.1 DVD, ISO file or product keyA device that is running Windows.What If I Have a Windows 8 Product Key?If you have a Windows 8 product key, you can download the Windows 8.1 ISO file directly from Microsoft's servers, and create a bootable USB drive as well. My colleague Wayne Williams has already written a guide which details all the steps that you have to go through. Please note that you need a Windows PC for this task.How Does the Windows 8.1 Product Key Help?Obviously, you cannot install Windows 8.1 using just the product key. But, you can use it to download the ISO file directly from Microsoft's servers. Please note that the default Windows partition (usually C) has to have at least 5 GB of free storage.

You will have to follow these steps next:Download and open the Install Windows 8.1 setup file from MicrosoftType in your Windows 8.1 product key and initiate the downloadAfter the download completes, select Install by creating mediaSelect USB flash drive (it should be the default choice) and insert the USB driveAccept any prompts to erase the contents of the USB drive in order to kick off the process.If you prefer a visual step-by-step guide, you can look at the screenshots posted below.rightHow Can I Create the USB Drive From a Windows 8.1 DVD or ISO file?If you already have the Windows 8.1 DVD or ISO file, you will first have to copy the contents of the DVD or ISO into a folder on the internal storage of the device. You can use 7-Zip or WinRARto extract the contents, if the file cannot be mounted. Please make sure the location you choose has more free space available than the size of the media -- more than 4 GB should suffice. After you have copied or extracted the contents, follow the next steps:Open the Command Prompt. This can be done by triggering the Run -- Windows Key + R -- feature, and opening cmd.Type diskpart to open the disk partitioning software. Accept the UAC security prompt, if asked.Insert the USB drive.Type list disk.

The program will then show you a list of all the physical drives (HDD, SSD, USB, etc.) that are attached.Identify the disk number of the USB drive (it can be recognized by looking at the size column it's usually the last listed disk) and type select disk X, where X is the disk number of your USB drive.Type clean. This will erase the contents of the USB drive, so make sure you have the contents backed-up beforehand.Type create partition primary. This command will create a primary partition on the USB drive.Type select partition 1. This command will select the created partition.Type active. This command will make the selected partition active.Type format fs=ntfs quick.

This command will format the created partition as NTFS.Type assign. This command will assign a letter to the USB drive, which will make it show under Windows Explorer.Copy the contents of the Windows 8.1 DVD or ISO from the created folder on the USB drive.Below is a visual step-by-step guide featuring all the commands presented above.

Windows 7: Product Key Number - Uninstall and Deactivate in Windows .

How to Activate Windows 8.1 for Free . Microsoft Windows ApplicationThis will not return the product key to a never before activated state.This will not permanently deactivate the product key number and prevent it from being able to be used to activate another Windows again later. This only removes the product key from the current computer leaving Windows not activated.This will not remove the product key from Microsoft activation servers. Microsoft activation servers will still have records of all computers the product key have been activated on.An OEM product key number is permanently tied to the motherboard of the computer it was first activated on. It can only be used to activate Windows on the exact same computer that it was first activated on.A retail product key number can be used to activate Windows on any computer as long as the product key has been removed from any other computer first.If you only wanted to change the product key number instead, then see:How to Change the Product Key Number in Windows 7EXAMPLE: Watermark that indicates Windows is not activatedNOTE: This watermark will be at the bottom right corner of your desktop above the taskbar notification area.Here's How:1. Open an elevated command prompt.2.

Do either step 3 or 4 for what computer you want to uninstall the product key on and deactivate Windows on.3. For a Local ComputerNOTE: This would your computer. A) In the elevated command prompt, copy and paste the command below and press enter. (see screeshot below) slmgr.vbs /upkB) Go to step 5.4. For a Remote ComputerNOTE: This would be doing this from your computer (host) to a remote computer (client) on the network.You would substitute Computer-Name in the command below with the computer name of the remote computer.You would substitute UserName in the command below with a user account's name with required permission on the remote computer.You would substitute Password in the command below with the user account's password of the remote computer. slmgr.vbs Computer-Name UserName Password /upkB) Continue on to step 5.5. Click on OK. (see screeshot below)6. The Windows on the selected computer is now in a deactivated unlicensed state with the product key number removed. You will also now have the This copy of Windows is not genuine at the bottom right corner of your desktop until activated again.7. Every time you restart the selected computer and log in, you will be presented with an option to activate Windows until you do so. (see screeshot below)A) If you Click on the Type your product key OptionYou will be prompted to enter a valid product key number for that edition of Windows.

If successful, it will activate Windows. (see screenshots below)B) If you Click on the Ask me later OptionWindows will continue to startup into the user account that you logged into, but will still be in a unlicensed state until you activate Windows using step 7A at the next restart or manually activate while still in Windows.That's it,ShawnSimilar help and support threadsWindows 7 Tutorial Category Product Key Number for Windows 7 - Find and SeeHow to Find and See the Windows 7 Product Key NumberThe Windows 7 product key number is a sequence of 25 letters and numbers divided into 5 groups of 5 characters each (ex: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX) that is used to activate either the 32-bit or 64-bit Windows 7 edition that you... Tutorials Product Key Number - ChangeHow to Change the Product Key Number in Windows 7This will show you how to change the product key number in Windows 7 so that you can use another product key number to activate your Windows 7 with instead.This can be helpful if you have entered the incorrect or no product key number... Tutorials uninstall/deactivate Windows key tutorial questionI followed this tutorial: my netbook so I can use the copy of Windows on my new laptop. Does using the command shown in the tutorial somehow send a signal to Microsoft letting them know the key... Installation Setup Changing product/serial number on Windows 7 Ultimate 64 bitHi all,New here, I hope that this is the right place for this.I bought a machine a short while ago and it has come up with a popup saying that 'You may be a victim of software couterfeiting' and also on the bottom right corner I have the Windows 7 build 7601 'This copy of Windows is not...

Windows Updates Activation How do I deactivate a Windows 7 Serial code?How do I deactivate my serial code whenever I want to format my PC, so that it resets the limit of how many times I can enter it?thanks Windows Updates Activation deactivate windows 7 in order to reinstall on another PCHello,I have a Toshiba laptop that came with Win 7 Home premium 64-bit. I installed Win 7 Pro 64-bit on top of Home Premium. Now I want to but a new laptop and move Win 7 Pro to the new laptop. Do I have to deactivate the Win 7 Pro? If so how do I do that? Installation SetupOur SitesSite LinksAbout UsFind UsVista ForumsEight ForumsTen ForumsPC Help ForumHelp Me BakeNetwork StatusContact UsLegalPrivacy and cookies

Fix found for Windows 8.1 upgrade problems on Surface RT .

*i*m*g*Note: Microsoft temporarilyhalted and then resumed Windows update 8.1 for Surface RT since this articlewas written. The issues described here should eventually be resolved, but the commands I highlight are important troubleshootingsteps that may be useful, in general, when encountering issues on Windows RT or8.1 (especially Modern UI problems).Microsoft released Windows 8.1 for Intel and RT on October17th, but it didn't receive much buzz. Many people quietly upgraded withoutproblems, while others upgraded and regretted it. One of the most frustratedgroups may have been early adopters of Windows 8.1 Preview. In various forums, quite a few users complained that they couldn't find the Windows Upgrade in the Microsoft Store, and the information online didn't resolve the issue.

Afterfinding myself in the same situation, I turned to my last resort — Microsoft support.This is a knee-jerk reaction on my part, having worked foryears in Microsoft technologies and knowing how difficult it is to get a liveperson who can actually help resolvean issue. But Microsoft has made great strides in supporting end-user consumerswith Xbox, Zune, and other products and platforms.Before trying to contactMicrosoft, I took the following steps:I brought up the charms bar and selected Settings | Change PC settings | Update and recovery, and then applied all theupdates there until I was notified that none remained. When the 8.1 updatestill wasn't available, I performed a system refresh from the Update andrecovery menu. The reset looked promising. After rebooting, I checked updatesand discovered that the patches either had to be reapplied or that more werewaiting.When I went into the Classic desktop, I felt a surge of excitement whenI saw that the Windows 8.1 Preview watermark was gone.

Unfortunately, the ThisPC properties page revealed that the device was still on 8.1 Preview. To make This PC show on your Classic desktop on Windows 8, right-click anywhere onthe desktop and select Personalize. In the Personalization control panel,select Change desktop icons, and in the Desktop Icons Settings view, add acheck to the boxes next to the icons you want on your desktop. You can thenright-click on This PC and select Properties to view the information on the System control panel.Next, I tried Reinstall at the Update and recovery menu. The same issues persisted. More online research indicated that you canmake a USB recovery disk with RT.

This is a step that I had unfortunately neglected, because it would haveallowed me to revert to Windows 8.I visited the Microsoft Surface Contact Us page, which was easy to find and navigate. I selected a live chat and wasquickly connected to a support person named Conan. I explained my issue and the steps I had taken,and to my dismay, he said that he wanted to confirm that all the updatesrequired for Windows 8.1 had been applied. Though dubious, I decided itcouldn't hurt to play along. The agent had me hit the [Windows]+[X] keyboard shortcut that brings up a menu with shortcuts to a variety of destinations, including the Control Panel,which he had me open. I was then directed to type windows update (no quotes) in thesearch box at the right top corner of the window ( Figure A).Figure AType windows update in the search box.Next, he had me click Check for updates. To my surprise, thisWindows Classic view found a firmware update that the Modern UI update from theCharms menu missed.

Once the updates were applied and the RT had rebooted, hehad me check again. An additional update was found and applied, and anotherreboot followed ( Figure B). Figure BInstalling a firmware update.This time, the Windows 8.1 Preview watermark was back, and noupdates were available. I was then instructed to use the [Windows]+[R] keyboard shortcut and run the following command: ms-windows-store:WindowsUpgrade (no quotes). This launched the MicrosoftStore and displayed the Windows 8.1 Update download screen. When I clicked thedownload button, it returned to the main Windows Store screen with noindication that the download was active.

The Microsoft agent had me execute the same keyboard shortcut, but this time, he instructed me to enter the ms-windows-store:installprogress command.This brought up the install progress screen in the Windows Store, where I couldsee that it was going to be a long time before the upgrade was complete.TechRepublic blogger Deb Shinder also experienced this issue with a Microsoft Surface Pro, and I provided her a copy of the chat transcript, which resolved herissue. Deb advised me that Microsoft has since published these instructions onthe Windows 8.1 upgrade site. However, ifyou're having problems finding the 8.1 upgrade in the Microsoft Store on an ARM- or Intel-based device, these instructions may help.

SLMgr Commands and Options for Windows Product Key / KMS / Token / AD Activation .

*i*m*g*Since Windows Vista, Windows incorporates enhanced anti-piracy feature in the form of Software Protection Platform that incorporates Windows Product Activation (WPA) and Windows Genuine Advantage Validation for retail users.In addition, corporate customers with volume licensing agreement now also have to activate each of the computers in their network under Volume Activation with either Multiple Activation Keys (MAK) or on-premise volume license key-management service (KMS) host or server for networked environments with 25 or more machines.Besides, OEM computer products preinstalled in factory is protected with System Locked Preinstallation (SLP 2.0) where BIOS is included with signed Windows Marker and SLIC table for instant activation. All these activation processes make use of Software Licensing Manager (SLMgr) module, also known as Windows Software Licensing Management Tool in Windows, a VBScript called slmgr.vbs that keeps track of licensing details.SLMgr script allows users to query the current installation and see details about Windows installation and its activation and licensing status. SLMgr.vbs can also be used to input or change 25-character product key that determines which Windows OS edition allowed to install and activate, and which also tells the Setup program whether you’ve purchased a full or upgrade license. To activate online or against KMS server, users or Windows GUI need to make use of the SLMgr module too.Most of the licensing operation in Windows can be done via graphical user interface. If you’re power user, you can access to all options, flags and settings of the SLMgr.vbs command script. To run the script, logon with an user account with administrator rights, and open an elevated Administrator Command Prompt window.The syntax and options that are available for slmgr.vbs command:Syntax of SLMgr slmgr [machinename [username password]] [option]machinename is local or remote computer or PC that wants to administer.

By default, if no machine name, user name and password is specified, current local machine is assumed.username is administrator equivalent user account to login into the computer.password is password for the user account.Example: slmgr remote_computer administrator password -dliOptions of SLMgrslmgr /dli (display the current license information of Windows with activation status and last 5 characters of partial product key)slmgr /dlv (stands for display license information, verbose, similar to -dli switch but with more detailed information)slmgr /ipk (enter a new or replace and change the current product key with the new product key supplied at xxxxx-xxxxx-xxxxx-xxxxx-xxxxx)slmgr /xpr (shows expiration date of current license state if Windows Vista is not permanently activated)slmgr /ato (activate Windows Vista license and product key against Microsoft’s server)slmgr /upk (uninstall current installed product key and return license status back to trial state)slgmr /cpky (clear the product key from the registry to prevent disclosure attacks)slmgr /ilc (install license)slmgr /rilc (re-install system license files)slmgr /rearm (reset the licensing status and activation state of the machine)slmgr /rearm-app (reset the licensing status of the given app)slmgr /rearm-sku (reset the licensing status of the given SKU)The following options used with offline activation such as through phone:slmgr /dti (display installation ID for offline activation)slmgr /atp (activate product with user-provided Confirmation ID)SLMgr options for Volume Licensing Activation Using KMS (Key Management Service):slmgr /skms activationservernameslmgr /sprt slmgr /skms activationservername:port (set the KMS server and the port used for KMS activation for Windows Vista Business edition and Windows Vista Enterprise edition)For example: slmgr /skms slmgr /skms KMSHost:8090slmgr /ckms (clear the name of KMS server used to default and port to default)slmgr /skms-domain (set the specific DNS domain in which all KMS SRV records can be found)slmgr /ckms-domain (clear the specific DNS domain in which all KMS SRV records can be found)slmgr /skhc (enable KMS host caching)slmgr /ckhc (disable KMS host caching)slmgr /sai (sets the interval in minutes for unactivated clients to attempt KMS connection.)slmgr /sri (sets the renewal interval in minutes for activated clients to attempt KMS connection)slmgr /sdns (enable DNS publishing by the KMS host)slmgr /cdns (disable DNS publishing by the KMS host)slmgr /spri (set the KMS priority to normal)slmgr /cpri (set the KMS priority to low)slmgr /act-type (set a value in the registry that limits volume activation to a single type: 1 for Active Directory 2 for KMS activation 3 for token-based activation 0 for any activation type)SLMgr Options for Token-based Volume Activation:slmgr /lil (list installed Token-based Activation Issuance Licenses)slmgr /ril (remove installed Token-based Activation Issuance Licenses)slmgr /ltc (list Token-based Activation Certificates)slmgr /fta (force Token-based activation)SLMgr Options for Active Directory-based Activation:slmgr /ad-activation-online (collect Active Directory data and initiates Active Directory forest activation using the credentials that the command prompt is running)slmgr /ad-activation-get-IID (start Active Directory forest activation in phone mode)slmgr /ad-activation-apply-cid (complete activation through activation phone call)slmgr /ao-list (display all of the activation objects that are available to the local computer)slmgr /del-ao (delete the specified activation object from the forest)Note: If when you enter slmgr command and an error returns that ‘SLMgr’ is not a recognized internal or external command, the cause is due to WindowsSystem32 directory is not inside your environment’s path. Simply type the full path of (assuming C: is Windows volume) C:WindowsSystem32slmgr, or change directory to %WinDir%System32 before issuing the SLMgr command.I am so confused. All I know is that I got this laptop (HP G70) as an 18th birthday present from my dad who bought it in New Jersey I believe and it is a genuine Windows Vista Home Premium. I just started having trouble with it maybe a couple months ago saying an unauthorized change was made to the system with error: 0x0C004D401 and I have no idea what to do because now I just got a notification that I have 30 days to fix the not genuine issue and the validation check process at: won't ever finish. I really need help and I want to access my computer like normal!

I DO have a genuine Windows Vista bought from a U.S. store. Please help me! Thank you!

Top 10 command-line commands for managing Windows 7 desktops .

*i*m*g*Here are my top 10 favorite command-line commands for Windows 7. Each command is native on the operating system so you don't need special software. Administrative access may be required for some of them. 1. Checking the IP addresses on the local systemOne of the most frequently used command by IT professionals is ipconfig /all, which displays the active Internet Protocol (IP) addresses, Media Access Control (MAC) address, default gateway, Dynamic Host Configuration Protocol (DHCP) status and more for each network interface on the computer.ipconfig /allRelated commands:ipconfig /release -- releases currently assigned IP addressesipconfig /renew -- acquires IP addresses from a DHCP server 2. Clearing the DNS cache on the local computerThe ipconfig /flushdns command clears the domain name server (DNS) cache stored on the local computer. It's often used when the internal network or external resources can't be accessed because of corrupted DNS data.ipconfig /flushdnsRelated commands:ipconfig /displaydns -- displays the current DNS cachenet start (or stop) dnscache -- turns on (or off) the local DNS cache client, flushing the DNS cache. Turning off the cache allows the system to resolve addresses: Each address will be resolved each time a request is made, rather than saving the IP address for that host. 3. Querying group policy settingsGroup policy settings determine how the computer is configured for system and user settings. Because these settings can be configured centrally from a domain controller -- as well as locally from the computer itself -- determining the actual in-use policy can be tricky.

The gpresult /r command displays the resultant set of policy, including when the policies were last processed and the actual settings for computer and user policies.gpresult /RFor remote computers:gpresult /S computername /U username /P password /RRelated commands:gpresult /H filename -- creates an HTML-formatted view of the group policy settings 4. Refreshing group policy settingsChanging group policy settings on the domain controller allows endpoint systems to receive the updates the next time they refresh their policy -- anywhere from 20 to 90 minutes later. To speed up this process and obtain the new settings immediately, force the update with this commandgpupdate /force 5. Shutting down a computerWhen performing systems management routines such as installing patches, it may be necessary to shut down and/or restart the system in a scripted manner microsoft windows application. The shutdown command will turn off a local or remote computer -- giving one minute's notice to the logged on user.shutdown /sFor remote computers:shutdown /m \computername /sRelated commands:shutdown /r -- performs shutdown and restartshutdown /a -- aborts a shutdownshutdown /r /t 120 /c Shutting Down for maintenance /f /d p:4:1 -- performs a shutdown in 120 seconds, gives a message to the user, forces applications closed and notes the shutdown reason in the event log 6. Query the audit settingsThe auditpol command can query and set audit settings on the local computer. For security auditing, it can be very useful to run this command on each machine and review the results.auditpol /get /category:*Related commands:auditpol /get /category:* /r -- outputs results to CSV format 7. Perform a Windows Update check inThe Windows Update/Automatic Update client typically checks in with Microsoft (or a local Windows Server Update Services server) every 22 hours. If you want to force a check-in sooner, run the following command.Note: This command-line script does not give any user feedback to the screen.wuauclt /detectnow 8. Query the status of servicesUse the SC command to see the services installed on a computer and if they are currently query state= allFor remote computers:sc \computername query state= allRelated commands:sc query service_name -- queries a specific servicesc qc service_name -- obtains configuration information for a specific servicesc \computername stop service_name -- stops a service on a remote computersc \computername start service_name -- starts a services on a remote computer 9. Query the status of the Windows FirewallWindows Firewall has different settings for different connection types -- a public profile for when you're connected to the Internet, a private profile for when you're connected to an internal network, and a domain profile when you're connected to the corporate network. It's important to understand which firewall settings are in use for each profile.netsh advfirewall show allprofilesFor remote computers:netsh -r computername advfirewall show allprofiles ( Note: Remote registry access must be available on the remote computer for this command to work.)Related commands:netsh advfirewall set allprofiles state off -- turns off the firewall for all statesnetsh -r computername advfirewall set publicprofile state on -- turns on the remote computer's firewall for the public profile.netsh -r computername advfirewall set privateprofile state off -- turns off the remote computer's firewall for the private profile. 10.

Execute a command against a group of computersWith the FOR command, you can execute commands against a series of computers or IP addresses. This can be a useful way to perform scripted actions against remote computers in a large network space.To query the firewall state for all computers in a Class C network and save results to individual filenames, enter the following:FOR /L %i IN (1,1,254) DO netsh -r 192.168.1.%i advfirewall show allprofiles 192.168.1.%i.firewallstate.txtSubstitute your favorite remote command-line commands in place of the netsh command above.Example:FOR /L %i IN (1,1,254) DO gpresult /S 192.168.1.%i /F /H 192.168.1.%i.gpresultFor more information about any of the above commands, type the command at the command-line followed by /?.About the author:Eric Schultze is a principal product manager at Amazon Web Services. Prior to Amazon, Schultze worked at Microsoft, where he helped manage the security bulletin and patch-release process. Schultze likes to forget that he used to work as an internal auditor on Wall Street.Search Virtual DesktopPredictions revisited: Microsoft DaaS, app refactoring and HPE MoonshotCitrix and VMware both ignored application refactoring in 2015, and Microsoft focused on Windows 10 instead of developing a DaaS ...Evaluate SimpliVity vs. Nutanix hyper-converged infrastructure for VDINutanix and SimpliVity are chief competitors in the hyper-converged infrastructure market.

The former has a longer track record, ...How to detect virtual desktop configuration driftChecking for configuration compliance is a time-consuming job, but administrators need to make sure virtual desktops don't drift ...Search Windows ServerJanuary Patch Tuesday closes support for IE versions, Windows 8Administrators with machines on Windows 8 and unsupported versions of Internet Explorer will need to update after this month.Painlessly parse a string with PowerShell 5For an administrator who works with unruly output from a legacy application, PowerShell 5 can help bring clarity to the situation.Anticipation builds for key Windows Server 2016 featuresMicrosoft's push to develop its container technology and its other advancements in Windows Server caught the attention of our ...Search ExchangeMicrosoft E5 plan supports new ATP, Skype functionalityMicrosoft's new Office 365 E5 plan offers features applicable across the organization. But some of the new functionality isn't ...Four tools to back up Office 365 that aren't from MicrosoftAvailability and security are essential for cloud services. Use third-party tools that encrypt data and offer backup support to ...Must-know Exchange Server info from 2015We've rounded up the top Exchange Server info of the past year, including a look at deploying Exchange 2016, and troubleshooting ...

Sysprep a Windows 7 Machine – Start to Finish V2 .

*i*m*g*This is version 2 of a step by step guide on Sysprepping a Windows 7 machine from start to finish. I cannot take full credit on this because my first article had so many helpful comments and discussions that this is simply a combination of all the good advice written into a working guide. (I would especially like to thank George for his input on Cscript for auto activation and Nathan for input on Sysprep Audit Mode).Note – I highly recommend creating a boot or rescue disk before starting any windows 7 technical projects. There are many tools in the market and I use Spotmau BootSuite rescue software and boot disk utility because of it’s versatile features and top notch performance. Windows 7 SysprepLast Updated on 06.08.13Proud to announce, this tutorial has been translated to Serbo-Croatian language by WHGeeksThis will guide you through the following:Audit ModeBuilding the unattend.xml file in WSIMcopyprofile=true command to copy the default profile (no manual copy)Prompt for a computer nameEnable Administrator accountAdministrator account logs in first time automaticallyActivate windows automatically with CscriptSuccessfully copy over taskbar iconsDelete unattend.xml file automatically upon completion of re-image.Here is a list of what you will need:Latest version of WAIK : KB3AIK_EN.iso Version 1.0Windows Vista or Windows 7 Machine to build the XML file onISO or DVD of Windows 7 Installation (x32 or x64)WinPE Boot Environment : WinPE 3.1 BootLoaderFirst we are going to walk through building the unattend.xml file (answer file) and then we will walk through the actual Windows 7 imaging process. PART 1 – XML FILE CREATION Step 1If you have a Windows 7 installation DVD, insert it now.

Or if you have an ISO of 7, go ahead and extract it to a folder on your desktop. (I recommend 7-zip). Step 2Launch Windows System Image Manager. Your start menu should look like the image below:Step 3Under the “Windows Image” header, right click and select new image.Step 4You will now want to browse to the .CLG file in your Windows 7 installation (I am using Windows 7 Enterprise x64 in my example). It is located in the sources folder. See Image below. You can select either the .clg file or the install.wim. Both will have the same result.Step 5Now we need to create a new answer file.

Go to the file menu and select “Create New Answer File.” Right after creating one, go ahead and simply go to file menu and select “Save Answer File.” This will give your XML file a name and save location. I chose to name mine unattend.xml. Now you see we have two category folders, Components and Packages. Under the Components folder you see that we have 7 options:1 windowsPE2 offlineServicing3 generalize4 specialize5 auditSystem6 auditUser7 oobeSystem Step 6These are very important as these are the steps in which the unattend.xml file is sequenced.The next part is a little confusing. You are going to add components, from under the “Windows Image” section on the bottom left hand side to the passes on your Answer File.

To add a component, you can right click on them and select “add to # pass”. There are many different options you can add, but they have to be done in a certain order and pass otherwise your sysprep might fail. I am simply going to use the one I created as the example.Here is more information about adding options under the passes: 1 windowsPENothing required in my example. 2 offlineServicingNothing required in my example. 3 generalizeamd64_Microsoft-Windows-Security-SPP_6.1.7600.16385_neutralSet 1 for SkipRearm to allow up to 8 rearms 4 specializeamd64_Microsoft-Windows-Deployment_6.1.7600.16385_neutralOrder: 1path: net user administrator /active:yesWillReboot: NeverRunSynchronousCommand[Order=”1?]RunSynchronousamd64_Microsoft-Windows-Security-SPP-UX_6.1.7600.16385_neutralSkipAutoActivation: trueamd64_Microsoft-Windows-Shell-Setup_6.1.7600.16385_neutralComputer Name: Leave blank (we will deal with this at the end)CopyProfile: trueRegistered Organization: Microsoft (you must leave this in this section)Registered Owner: AutoBVT (you must leave this in this section)ShowWindowsLive: falseTimeZone: Pacific Standard Time(Please view TimeZone settings here - can delete other sub-header components if you don’t need them. 5 auditSystemNothing required in my example. 6 auditUserNothing required in my example.

7 oobeSystemamd64_Microsoft-Windows-International-Core_6.1.7600.16385_neutralInputLocale: en-usSystemLocale: en-usUILanguage: en-usUserLocale: en-usamd64_Microsoft-Windows-Shell-Setup_6.1.7600.16385_neutralRegisteredOrganization: Your Company NameRegisteredOwner: Your NameAutoLogon1. Password: Administrator PasswordEnabled: trueLogonCount: 5Username: administratorFirstLogonCommands1. CommandLine: cscript /b c:windowssystem32slmgr.vbs /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (windows 7 license key)Order 1RequiresUserInput: falseCommandLine: cscript /b c:windowssystem32slmgr.vbs /atoOrder 2RequiresUserInput: falseSynchronousCommand[Order=”1?]SynchronousCommand[Order=”2?]OOBEHideEULAPage: trueNetworkLocation: HomeProtectYourPC: 1UserAccounts1. Password: Administrator PasswordAction: AddListItemDescription: Local AdministratorDisplayName: AdministratorGroup: AdministratorsName: AdministratorLocalAccount[Name=”Administrator”]AdministratorPassword: Administrator PasswordLocalAccountsIf you have questions, look at my image above to see full layout of components, it should help. Step 7K, now go ahead and save your answer file as unattend.xml. Step 8If you want the sysprep to prompt for a computer name you need to remove a line from your XML file.

Open up your XML file you saved with notepad and remove the following line:PART 2 – IMAGING PROCESS / RUNNING SYSPREP Step 9Install Windows 7 (Enterprise) from CD or USB flash drive, when you arrive at the welcome screen and it asks you to create a username, hit ctrl+shift+f3.This will reboot your machine and put your windows build in ‘audit’ mode. Step 10On reboot, you’ll automatically be logged in under the built-in Administrator account. A sysprep GUI box will appear, but you can close it and NOW begin to customize your profile. Step 11Install any software/drivers, make any profile customizations, etc.If you need to reboot, the computer will boot you back into the Administrator account. You will be stuck in this audit mode until you run sysprep with the /oobe parameter. After doing so, sysprep will delete/clean up the Administrator account, but if you have copyprofile=true in your unattended answer file, it will copy the customized Admin account to the default profile before deleting it. Step 12On the PC you are going to be running sysprep on, you need to create a folder called scripts in this directory: %WINDIR%Setup. Now you are going to create a CMD file within the %WINDIR%SetupScripts directory.

Right click and make a new text file called SetupComplete.txt. Remove the .txt extension and replace that with .cmd. You now have a SetupComplete.cmd file which windows will read the first time it boots up from the sysprep. We need to place a script inside the CMD file. Edit the cmd file with notepad and insert this line: del /Q /F c:windowssystem32sysprepunattend.xml.

This script will delete your unattend.xml file after it has been used. The unattend.xml file is also copied to the C:WindowsPanther directory, so you will want to add a second line to the CMD file, del /Q /F c:windowspantherunattend.xml. If you have passwords or cd keys stored in that xml file you don’t have to worry about it being left on the computer.UPDATE AS OF FEBRUARY 27, 2013: Read my Taskbar Icons Tutorial before continuing. Step 13Once you have everything configured correctly, Copy or move your unattend.xml file to : C:windowssystem32sysprep.Now to run sysprep you need to launch Command Prompt as an administrator. To do this press start, and type into the search CMD then right click on CMD and select run as Administrator. Next navigate to the sysprep folder by typing: cd sysprep and pressing enter.Next, input the following commands: sysprep /generalize /oobe /unattend:unattend.xml /shutdown Step 14Turn the computer back on and boot to WinPE 3.0 environment (USB stick or CD/DVD). You can use our TheITBros WinPE3.1 BootLoader to boot up from USB or CD and capture your image. Capture image and save image to network location.A Dell 960 or GX755 is a good standard for capturing when you want a generic image for use with multiple systems.

Might require injecting additional drivers for 3rd party brands, HP, etc. Most should work though right out of the box. Step 15On reboot, Windows will run out of the box, as the /oobe is intended. As long as you put your cd key into the unattend.xml file, windows will be activated automatically in the background, you will be automatically logged into the administrator account, and the unattend.xml file is deleted. You are now ready to use the computer or join it to the domain.

Enjoy! TIP #1Thanks T800 for the tip: “Apparently I had to stop ‘Windows Media Player Network Sharing’ service before I could run /oobe /generalize, otherwise it gave me a fatal error.”Dan Wright also mentioned that you need to set the network location to “Public” and/or delete some files and registry keys. See this article: TIP #2To enable Aero your computer needs to calculate it’s performance score. Do you want to do that on each and every machine? No. So, if all machines have the same hardware, run this before syspreping your master-image : winsat prepopThis will calculate the performance index and put it on your machine in xml-format. If the OOBE wizard finds this xml file, and the hardware hasn’t changed, it uses the pre-populate values and Aero works out of the box. TIP #3From user comment:After many hours of battling, I also found that a registry entry must be added for sysprep to look in the C:Drivers location.

In HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version click on “DevicePath” and enter “C:Drivers” (remember the entries must be separated by a semicolon). More info here: TIP #4From user comment:To keep the drivers installed to the computer there has to be a option under “generalize” (Microsoft-Windows-PnpSysprep_neutral - PersistAllDeviceInstalls=TRUE and DoNotCleanUpNonPresentDevices=TRUE. Otherwise if one of your device is off, the driver is uninstalled and etc.”Now to run sysprep, navigate to thatsysprep folder, hold SHIFT and right click and select “Open New CommandWindows Here”. Next, input the following commands:sysprep /generalize /oobe /shutdown /unattend:unattend.xml”Two Quick notes on this:1. When you run the command prompt it needs to be an administrative command prompt, to do this press start, and type into the search cmd then right click on cmd and select run as administrator. Next navigate to the sysprep folder by typing: cd sysprep and pressing enter.2. when you run the sysprep command, a more proper syntax would be this order: sysprep /generalize /oobe /unattend:unattend.xml /shutdownOther than that, exceptional tutorial!Hi Bob. So the .xml file was created and saved somewhere. Now begin a standard Windows 7 installation on a target machine and hit ctrl+shift+f3 as described in step #9 to enter ‘audit’ mode and continue with steps 10-13.

In step you will copy this .xml file to the target machine.If you are unable to get to the screen where Windows prompts you for a username, then maybe you’re using an OEM recovery DVD rather than a genuine Windows installation DVD? The latter is required to install the OS from scratch.-HTH!I have 50 models of laptops ans desktops – This method works flawlessly if is done proper so:Step 1 : On you image at setupcomplete or first logon commands or simply first start-up you have to put one little bat or cmd that looks like this:@echo off::~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~if %PROCESSOR_ARCHITECTURE% == x86 (goto :x86) else (goto :x64):x64forfiles /P %systemdrive%Driversx64 /S /M *.inf /C “cmd /c pnputil -i -a @Path”goto Next:x86forfiles /P %systemdrive%Driversx86 /S /M *.inf /C “cmd /c pnputil -i -a @Path”goto Next::~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~:Nextshutdown /r /t xx /c “bla bla whatever”This means that this cmd will see what win you have x64 or x86 and if it is x64 will install whatever inf files it founds in C:ITDriversx64 and recursive scan all subfolders from that level down…If is not x64 and is x86 will install all inf files from C:ITDriversx86 and all sub direcroies it finds from that level down.Basically it uses a combination of frofiles and Microsoft pnputil built in windows 7 and above. Checkout pnputil /? for more.-i -a will add the drivers to windows store and install them same time.After this at :Next the rest of your script will go as you plan it and the reboot from the end is mandatory. Is posible that you need to set autologon count value to 2 or more.Because I have many different hardware will use after restart winsat dwm instead of prepop commad for aero…Sure you need to have a folder that contains Driversx64 x86 structure declared in cmd but that’s the easy part. On youC drive make a folder called 1 and in it onother Drivers that contains x64 folder and x84 folder.

Now download from HP or Dell for specific model drivers manageability pack or dellA.xx cab these have all the drivers at one big pack, extract them and simply throw x86 drivers to your x86 and x64 to your x64 doesn’t matter the names as pnputil will scan all the substructure dir.Now test the drivers to be all signed as pnputil and win7 will not accept unknown publisher drivers and you want to avoid continue anyway pop-up box.These junk drivers such as jmicron or atheros will have to deploy with a separate script that uses silent switches setup.exe /s or /S /v/qn depends…So put this script if is needed for a specific model also in your drivers 1driversSoft and remember to call it after restart.Now capture 1 folder imagex /capture /compress maximum c:1 d:hp8470.wim for example. Deploy this wim immediately after your wim OS image and that’s it.The hard part is to predetermine what model of computer you have before you apply wim OS image. For this You have to put in place in PE some vbs that do a wmi query to determine the right model.All brands have a unique code for a specific type of machine that looks like:For HP is something like 309AH HP Elitebook 8470pFor Dell is Dell Latitude E5410.So make an challenge- response mechanism with all your models and associate the response of wmi query to a wim pack for the specific model or put the vbs to phrase an xml file.“309AH”–”HP8470.WIM”Thank you very much for this. It has really helped us out.However, we are seeing a really odd problem that seems to be tied to Audit mode. At least we don’t see it on a naked install of Win7(x64), but after booting into Audit mode (Step 9), it is repeatable and worse yet, doesn’t go away after sysprepping (step 13). It sticks with any machines the image is dropped on. We are creating the master setup on a VM.The Problem: Once any CD/DVD is inserted and then ejected (after Windows “sees” it), both PowerShell and any MMC (incl.

Computer Management) will not start until any CD/DVD (not even the same one) is inserted. The message window cannot be canceled, ignored or force quit. Prior to the disc insert, both PoSh and MMCs work just fine, but until a reboot neither works without a disc in the drive (virtual or otherwise). We are seeing this on both the Professional and Enterprise flavors of Win7.Any suggestions on why or where to look?Haven’t visited the page in a while and there are lots of good tips added.Wanted to ask a question because I have tried to capture out of Audit mode and not having much luck. I dotn do it intentonally, but smetimes the PC doesnt auto login to audit mode and comes up with the normal admin login.

I dont wont to waste all the time re-updatig and changing my configs. Is there a way to go back into audit mode after it goes back to user logins….and still start normally next time. After this it always stops at “Windows could not finish configuring the system. To attempt to resume configuration, restart the computer. ” and loops. Safe mode and the repair cd’s don’t help after this pointI have used many features from this post to create my own version of unattend.xml, and my win7 sysprep been working fine.

Until recently my windows activation failed during unpack. When the computer got to the control alt del screen (joined to domain) and login, the first message I see is windows is not geniue and ask to activate. If I cancel out the activation process cscript start to run and active windows for me. From the pass windows activated during unpack stage. The last modify to the script is only added below component in generalize section.trueI have been using the same script for monthes. Even I roll back and use older version of unattend.xml, it does the same.

Has MS changed the security handling in the windows activation? Any one got any ideas?PS. I am using MAK key and the activation is 100% working from cscript end.If you’re using a Key Management Server (KMS) to manage licenses you’ll have to change the ‘SkipRearm’ value to 0 before you sysprep the machine for the final time.An image that was sysprepped with SkipRearm=1 in it’s unattend.xml will have the same CMID for all the machines cloned from it, regardless of whether you used the /generalize switch. /generalize will only reset the machine SID if the SkipRearm flag is set to 1.This causes all KMS activation requests to appear as though they’ve come from the same machine and your KMS server won’t be able to tell them apart or hand out licenses, especially if it hasn’t passed it’s activation threshold yet.If you’re using a KMS server you don’t need to use these commands either as your machines will automatically try to contact the KMS server upon boot:FirstLogonCommands1. CommandLine: cscript /b c:windowssystem32slmgr.vbs /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (windows 7 license key)Order 1RequiresUserInput: falseCommandLine: cscript /b c:windowssystem32slmgr.vbs /atoOrder 2RequiresUserInput: falseSynchronousCommand[Order=”1?]SynchronousCommand[Order=”2?]I recommend capturing a system image before (and after) running sysprep so you always have a reference point to return to for adding/removing features, programs or making other tweaks to your image and not have to worry about sysprepping the same image multiple times.For more info see: Brian All Commentors below!A lot of good input with this thread, and great that it is still active today – as some environments are still making the jump to Windows 7 (dont judge!)I wanted to query the Activation Process (Synchronus login steps) and also the Post sysprep SetupComplete.cmdI’m finding that on first login, i get the command window where the computer is obviously running cscript with the syntax from Step6 of Windows Activation, however when i get into Windows – it is not activated?Additionally – the SetupComplete.cmd does not run?Originally i noticed it didnt have permissions to run the delete process – so i go around this by disabling User Account Control. However although i can run it manually now, it still doesnt process it when logging in?I’ve also added Office 2010 activation to the FirstLogonCommands as step 3, but that doesnt appear to work either!Would appreciate anyones inputFirst Loong batch file works for me. I put everthing in a batch file when I ready to run sysprep on audit c:windowsSetupScriptsmove /y SetupComplete.cmd c:windowssetupScriptsSetupComplete.cmdMake sure SetupComplete is on SetupScripts folder. You can copy the file manually if you want.Also for office activation I have incuded it SetupComplete.cmd and I have found you have to check the status prior activate the office.

See below command linecscript “C:Program Files (x86)Microsoft OfficeOffice14OSPP.VBS” /dstatuscscript “C:Program Files (x86)Microsoft OfficeOffice14OSPP.VBS” /actcscript “C:Program Files (x86)Microsoft OfficeOffice14OSPP.VBS” /dstatusFor this method to work, your office key must be embeded in the office installation. I use the customised MSP method and build my customised office 2010 installation. See this link:, a glitch with the unattended.xml. After I control+shift+F3 to enter audit mode as Administrator after primary installation. I do my customizations and updates (choose public to avoid wmp/sysprep error) I insert the usb with unattended.xml created from your instructions right as I sysprep /generalize /oobe (using gui).

When the system restarts it enters the phases of installing devices then gets error panel that says “unable to process there is an error in unattended.xml… specialize pass amd64_Microsoft-Windows-Shell-Setup_6.1.7600.16385_neutral. I think it is the copy profile item.Let me know what you thinkHarryThis was some time ago. I could not get the copy profile to work so I abandoned the unattended.xml After entering audit mode/Administrator I went to computer properties – Advanced system settings – User Profiles/settings amd selected *administrator the “copy to” button was greyed out so I found a program called “EF Enabler” which then allowed me to copy the profile to an alternate location. Then I copied that profile to C:UsersDefault (Not Default User) – these are hidden, then sysprepgeneralizeOOBE after shut down copied the partition to an image using Hirens boot with terabyte for windows on to an external usb hard drive. creating the Hirens boot disk [usb/cd/dvd] is another project This way when you apply the image to a target machine and boot it for the first time it goes to device install and OOBE asking for a user name. This user and all users thereafter will get the default settings and programs that the Administrator had in audit mode after customizations.

One thing to remember is during initial setup of the reference machine when you choose an install partition and format it windows will create a “System Reserved” 100Mb partition after it does this delete the install partition you just formatted and then extend the “System Reserved” partition to take up the unallocated space just created by the deletion. This will force windows to put the system and boot files on the same partition (make sure you have no other hard drives attached to the motherboard) The only negative side effect is bitlocker can not be used but doing this will save headaches later as you will have only one image to copy and apply. I found that when using [G]Imagex to do the imaging work when I applied to the target machine it would not want to boot and had to go through using Win 7 repair boot media nightmare. Terabyte backup achieves consistent results. While in audit mode you can change the volume label to “Win 7” and the hirens disk to open partition wizard and change the “Disk Type ID” on Win 7 (C:) to “0x07 [NTFS] (may have to do this when booting to capture the image)Good afternoon, thanks for the awesome tutorial, I dont know if this has been mentioned, but I want to share some info. When I did the xml for 64 bit everything went great, but when I did it for 32 bit I run into the proble were I was not asked for the computer name. What I had to do is add any carracter to “Computer Name: Leave blank (we will deal with this at the end)” so it would create an entry on the xml.

Once the xml was created I was able to find the computer name and delete it, once I did this I was able to be asked for the computer name.Its going to be complicated since each machine’s wireless card has unique GUID value, and even if you get the GUID after OOBE stage, I am not sure a simple copy paste profile will work on the new machine as I haven’t test it myself. The wireless profile are stored under c:ProgramDataMicrosoftWlansvcProfilesInterfaces[Interface Guid].The profile name and key are encrypted and stored in above path.If you find a way to get the wireless card GUID then you start try copy the profile across and test it.Hei Brian, thanks for this pig pick, this is really the best guide for this theme. I am deployng 48 hour now but still confused. I have got across many bariers, but the last one is the hardest one windows application experience. My sysprep proces ends with:2013-09-11 08:27:25, Error [Shell Unattend] TakeOwnerAndDeleteKey failed (0x80070002)2013-09-11 08:33:48, Error [msoobe.exe] Failed to install product key [hr=0xC004F050]2013-09-11 07:52:25, Info [Shell Unattend] CopyProfile succeededThe profile was not copied, never ever …I did not try to install any product key…Or there is problem with some security permisions to profile?I don’t understand the difference between MAK and KMS, I have both keys for our school.MAK is usually working for manual activation. Windows has been activated in audit mode using MAK key.I have tried from complex to simplest xml configuration, but nothing works:trueI have get across IE10 bug and I must uninstall antivirus, because any software with special security is not compatible with sysprep, now I knowThank you for this article, it helped me a lot when creating a Windows 7 Enterprise image for my organisation. Although, I have deployed a few machines and have run into a problem.

A user cannot print colour jobs, she is the only user using a Windows 7 machine to print to this printer.To troubleshoot this, I added the print queue to a machine I prepared with a fresh installation from disc and do not have the same problem. Coincidence? I have tried with 2 reimaged machines and 2 normal installation machines. The image has some kind of issue. Everything ran smoothly upon answer file creation and capture.

So cannot understand what is causing this.Has anybody else had a similar issue? If so, would you be so kind as to let us know if we can do anything to rectify it?Hi Brian,I’ve been using your well documented steps for 3-4 years now.I remodelled my sysprep environment using your steps as the foundation.Created my last two images Win7x86 and Win7x64 in VMware and I’ve successfully deployed these images to 3 generations of PCs both desktop and notebook over the last three years.I updated my Win7x64 image with new driver cabs, windows updates, flash, java and sep etc.Sysprepped and attempted to deploy.Unfortunately during the device installation phase of minisetup i hit a BSOD 0x0000007E at 86%.I’m unfamiliar with how to troubleshoot at this point. It does create a minidump but have no way to get it. Suppose I could mount this as a second drive on another system.Have you encountered anything like this?Would appreciate any tips.thx. in advance.One big issue:Why do I get randomly under users Administrator.Computername and Administrator forder empty.I do have copy profile in unattend.xml and it is copied corect but not completly removed the old one each time.I entered in audit mode to customise profile. and I saw the local Administrator account was disabled as supposed to be. Should I enable local Admin account to get rid of this annoying new Administrator.Computername, give full rights on folder berfore capture what could be the reason for this unproperer behave?I have put in place in audit mode 1 script per machine startup via gpedit.msc (some local vbs) and 1 for users – template -clean start menu for new users – that’s all the rest is done after autologon via vbs scripting.Please helpHello Brian, hope u can help me out here. I want to create a win 8.1 enterprise 64-bit answer file that will enable local administrator, also enable an additional local admin user, leave the current device drivers, disable windows firewall, keep windows. 8.1 product key (we use volume license) so that we dont have to enter manually everytime. Ask only for computer name after reimaging and dont have to ask for office 2013 poduct key as well.

Sorry for the list but really need ur help! [email protected] Brian, hope u can help me out here. I want to create a win 8.1 enterprise 64-bit answer file that will enable local administrator, also enable an additional local admin user, leave the current device drivers, disable windows firewall, keep windows. 8.1 product key (we use volume license) so that we dont have to enter manually everytime. Ask only for computer name after reimaging and dont have to ask for office 2013 poduct key as well. Sorry for the list but really need ur help! [email protected]’ve done a fair amount of searching and reading and cannotfind a solution to what I’m attempting to do. I have a computer image.

I gointo audit mode on that machine to finalize any customizations that I want. I want to enterthe product key and activate Windows 7 prior to delivering. ThenI run Sysprep to prepare the machine for delivery. I do not want the end user to have to enter aproduct key or activate Windows 7 when they obtain this machine. I wantthe end user to get the computer with all the updates and programs installed withWindows activated.When you run the sysprep /generalize command, theactivation clock will automatically reset. However, you are supposed to beable to bypass this setting by adding the Microsoft-Windows-Security-SPPcomponent to your answer file. You then set the SkipRearm setting to 1. Thisenables Sysprep to run without resetting the activation clock or having toenter the product key doing setup. I have set the setting to 1 in my answerfile.I do all the customizations I need.

I then enter the product key andactivate Windows 7. Once I start the computer and go through the OOBEsetup (like a new customer) it still asks me for a product key.Does anyone have any additional ideas or tips on how to keep theWindows Product Key activated so the customer doesn’t need to enter the productkey doing setup?Thanks for your input.

How MSDN members that only have access to Windows 8 VL (Volume License) editions can activate their Retail Keys instead .

How to Activate Windows 8.1 for Free . activate windows 8.1 command lineLet's start with the error that you may see, when trying to activate your Windows 8 x64 Pro installation from the VL (Volume License) media nameden_windows_8_pro_vl_x64_dvd_917699.iso:Windows couldn't be activatedGo to Control Panel to learn about other ways to activate.Error code: 0x8007232BError description: DNS name does not existHeading over to MSDN, logging in (assuming you have a current subscription), and browsing your way to the Windows 8 downloads, you may find yourself confronted with this message:This is a VLK KeyWhile we offer this Volume Licensing (VL) build through Subscriber Downloads, you must obtain product keys from the Volume Licensing Service Center (VLSC).Only administrators can access keys in the VLSC, so please contact your organization’s administrator for this key.As a more immediate option, you can always choose the retail build of this product, which is available with a product key in this same section of Subscriber Downloads.All you need to do is login to MSDN, and head over to the My Product Keys you'll see any Retail keys you claim listed, just click the Get a Key button to make your claim.If you go a little overboard with claims in just one day, you'll need to come back another day:Now that you got the keys, here's how to change from your Enterprise key (which it never asked you to type in during or after the install of the VL edition), to the Professional key.1) Open a command prompt, as Administrator2) Type (putting your key inside quotes):slmgr.vbs -ipk your-license-key-here-with-the-dashes3) You should get a confirmation immediately (if you're Internet-connected):If you prefer a GUI instead, the method explained here is said to work as well (using Start, Run, slui 3 (without the quotes).it then says Thanks you're all done.I also noticed that after an upgrade install of a ThinkPad T61p, from Windows 7 x64 Ultimate to Windows 8 x64 Professional, I was able to activate using the above SLUI 3 method. I then removed the hard drive (had issues with wireless after the upgrade).So then I put another hard drive in, and did a fresh install of Windows 8 x64 Professional. No problem, was able to activate, using the same exact key.Source(s) include:Windows 8 activation error: Code 0x8007232b, August 16, 2012, Bal?ssy Gy? 06 2012 Update:Thanks to Perc, see also new article about Pro and Media Center please let us know how it goes, with super easy to use comment system below. Thank you!Nov 09 2012 Update:Unfortunately, bad news for those who desire to use the free (until Jan 31 2013) Windows 8 Media Center Pack that you get from Microsoft here.I went to try and upgrade my Windows 8 Pro, trying to follow the instructions that came along with the emailed license key:Swipe in from the right edge of the screen, and then tap Search. (If you’re using a mouse, point to the upper-right corner of the screen, and then click Search).Enter add features in the search box, and then tap or click Settings.Tap or click Add features to Windows 8.Then tap or click I already have a product key.Enter the product key, and then click Next.Read the license terms, select the check box to accept the license terms, and then click Add features.I quickly noticed there was no such option as described in Step 3 above.Turns out, the Volume License version of Windows 8 Pro won't allow Media Center activation, see Missing Media Center in Windows 8 PRO Volume License.Then I try to buy a copy of Windows 8 Pro over here, but it gives me an error, Sorry, Windows 8 isn't available for online purchase in the country/region you are inWorkaround is simple, listed here, just launch the file you downloaded, Windows8-UpgradeAssistant.exe, in Windows XP Compatibility mode.But still, I cannot seem activate the Windows 8 Media Center Pack.If I open a command prompt as Administrator, and type:slmgr.vms -ipk _my license key for Windows 8 Media Center Pack_it fails with this message: 0xC004F069So I type:slui.exe 0x2a 0xC004F069and I get:So now I try an in place re-install, running the Windows8-UpgradeAssistant.exe, in Windows XP Compatibility mode, and choosing this option, not sure what will happen (I have a full backup)...Re-install went fine, takes a while of course.And good news, this time, the instructions actually work, step 3 item shows up:3. Tap or click Add features to Windows 8.4. Then tap or click I already have a product key. Paste the Windows 8 Media Center Pack offer license key from the email you received from Microsoft.It reboots, then:then brings up this it all works now (even if Media Center's days are numbered)CopyrightShort excerpts may be used without prior authorization if the source is clearly indicated, including a direct link to the article.

Focus is on home test labs, not production environments. No official support is implied or promised, and all advice by the author or commenters are on a use-at-your-own risk basis. Properly caring for your data is your responsibility. TinkerTry bears no responsibility for data loss. Following all local laws and software EULAs is your responsibility.© 2011-2016, LLC all rights reserved.Amazon and Skimlinks, LLC is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees from links to, or Amazon Prime for free shipping.Most of the other links use Skimlinks automatically, with no additional effort from the blogger or shopper. Here's the Skimlinks Disclosure, following FTC Guidelines.

If you're interested in automatic Skimlinks to help cover the cost of running your site, consider using this referral.

Windows 10 upgrade not showing up yet? Here's how to manually trigger an update .

*i*m*g*Microsoft has opened the floodgates for Windows 10, making the upgrade available in 190 countries around the globe. If you've already reserved the upgrade on Windows 7 and Windows 8/8.1 and are yet to see the update, there's an easy fix that allows you to manually initiate the download process.Before you begin, ensure Windows Update can download and install updates automatically. Not sure how to do that? Here's how: Turn automatic updating on or offOpen Windows Update by swiping in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), tapping or clicking Settings, tapping or clicking Change PC settings, and then tapping or clicking Update and recovery.Tap or click Choose how updates get installed.Under Important updates, choose the option that you want.Under Recommended updates, select the Give me recommended updates the same way I receive important updates check box.Under Microsoft Update, select the Give me updates for other Microsoft products when I update Windows check box, and then tap or click Apply.Once automatic updates are enabled, launch Command Prompt in Administrator mode and enter the following command: wuauclt.exe/updatenow. That should trigger the Windows 10 download.

How to start a command prompt as an administrator:Click Start, click All Programs, and then click Accessories.Right-click Command Prompt, and then click Run as administrator.If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.If you're having any issues, be sure to hit up Windows Central's forums. This discussion is dedicated to force updating. While you're waiting for Windows 10 to download, check out our review!Windows 10 reviewPlease I want to know how you use the ISO to accomplish that. Did you boot from a DVD or USB as in restarting your current windows or you opened the setup program from you media intallation source while your current version of windows (W8.1) was in operation? I also currenlty have W8.1 OS on my PC and I am scared of the upgrade as I do not want to lose many of my already intalled prorgrams and app fearing that Installing from from an ISO may perform a clean install that will wipe out everything. Please educate me, thanks.I am not sure how this upgrade thing is handled.

I had one PC that came without any OS (bits were swapped so OS removed) - I had ISO installed W10 TP on it. Today after getting full upgrade, I stopped Insider Builds, it then restarted and now my W10 is still activated. I believe you can convert - Pirated Windows (keyless versions) to Genuine as long as you associate your local account with MSA. You DON'T need to be a life time insider as every other blog said. At least for me that isn't the case today.

Not an insider on keyless PC, but have genuine full version installed.YOu don't need any key for free upgrade. Onely things you need are(1) suitable hardware ( some graphic driver anre not available for windows 10)(2) Installed and activated genuine windows 7 SP1/ 8/8.1.(3) download windows 10 installation file form .Pls make sure to choose correct version based on existing windows and architecture . Instruction to choose and install YOu can download ISO file and open in your 8.1 . open in file explorer and run setup file as administrator. It will be activated automatically without asking any key. you will be asked to enter kwey if you clean install. you can skip to enter key to complete installaton if you install on tpreviously upgraded PC ( you need to upgrade once first to get the hardware ID registerd for windows 10). YOu can install clean without key and it will be activeated.Actually, there won't be any bug fix for this issue. Because this isn't a bug. According to microsoft, you will get your free copy of Genuine Windows 10 only if you upgrade through their reservation system.Just talked to a microsoft support guy.

As per his instruction, you need to Go back to Windows 8.1 or whatever your old OS is by going to Update-Recovery- Go back to Windows 8.1 (old version here). Then you should properly upgrade to windows 10 again through their reservations system.Now I am waiting for the update from the reservation system. Hope that makes sense, ThanksThe reason why it won't work for people is because the boot.wim file and a second unknown file don't download when you check for updates. Some speculate that it's because they're time locked until the 30th. Try changing the time to 30th July and deleting everything inside C:WindowsSoftwareDistributionDownload and $windows.~BT then run the command wuauclt.exe /updatenow in command prompt as admin, it should start downloading the update including the missing files.Edit: I can confirm that this method works.

How to turn on Windows Defender in Windows 8.1 .

*i*m*g*Windows 8 and 8.1 are more secure than their predecessors because of Secure Boot in UEFI and also because of a revamped version of Windows Defender.Windows Defender first joined the fight against malware in Windows Vista. It was basic tool that shipped with Windows to combat spyware. Defender accomplished this feat by monitoring common files and folders that were infamous for being besieged by malware.In Windows 8 and Windows 8.1, Microsoft augmented Defender with antivirus signatures. Now, Defender offers protection against not only spyware but also rootkits, viruses and Trojans.But is the protection sufficient? In other words, how well does Windows Defender actually defend PCs against the machinations of the bad guys?People often wonder if Windows Defender is as good as some of the bigger names such as AVG and avast. My answer invariable remains the same: Defender simply isn’t as robust as the big boys. Although Microsoft has made great strides toward improving security in Windows 8, Defender still isn’t an enterprise grade virus solution that obviates the need for more focused alternatives.AV-test is a Germany based, independent, security institute that comprises 30 it security experts. In January and February of this year, it subjected Windows Defender to rigorous tests and serious scrutiny:The testers had three objectives in mind:How well does Defender protect PCs against malware?What is the impact on computer performance?How easy is the software to use?Defender came out with a sparkling high usability score however, the more important protection score was an abysmal 2 out of 6. This is exacerbated by the fact that in 2009, Windows Defender actually had a certification from AV-test however, in 2012 it lost the AV-test badge because it continued to yield unacceptable scores in protection and virus repair.

Moreover, compared to the AV industry, Defender is well below the average therefore, I don’t recommend using Defender as a serious antivirus solution. AVG and avast are both free and offer superior AV protection.That being said, this doesn’t mean we should absolutely banish Defender into oblivion. After all, it does offer some antivirus protection – I just don’t recommend it as a permanent solution.In summary, my advice is to view Windows Defender as a stepping stone toward a more secure AV solution. It’s just a temporary fix to protect from basic threats until you install something like AVG and avast. When you decide to install a better AV suite it should automatically disable Windows Defender for you.Now that you know what you’re getting into here’s how to enable or disable Windows Defender: Enabling and Disabling Windows DefenderTo toggle Windows Defender on and off press Windows Key + q from the Desktop or head over to the Start Screen and start typing Windows Defender.Defender will quickly pop into the search results.Give it a click and the Defender application will steal the stage.If Defender is disabled you’ll immediately know because of the frightening blood red color theme that decorates the main window.Click the obnoxiously big Turn on button to activate Defender.When everything turns green, you’re protected.You can run a full scan by clicking Scan now in the right pane. If you want to disable Windows Defender, head over to the Settings tab and uncheck Turn on real-time protection (recommended).Have you had any problems with Windows Defender? Do you think it’s a good AV solution? Let me know in the comments.Hi Vonnie, your response to this question of how to turn on Defenders was helpful as it got me thinking outside the box.

Apparently when you have a pre-installed security app already installed on a new computer , its goal is to make you pay! I refused to do this as Microsoft has an app that goes with the package. Therefore these ay security programs make it difficult, if not impossible to get them off and the computer will not run two security apps at a time. I got it though, as I am tenacious and don’t like it when somebody tries to force me to do something…ha-ha

Can’t reserve / activate Windows 10 Causes possible solutions. .

How to Activate Windows 8.1 for Free . windows 8.1 activation via command lineNot able to Reserve Windows 10In case you want to upgrade to Windows 10 but you are not able to see the “Get Windows 10 app” ( click here to read more about how to upgrade to Windows 10) on your PC, here are possible reasons and solutions to this. Some possible causes are:1) Your device may not be compatible. Check the eligibility and stem requirements here.2) In case any of these two are the reason behind you not able to see the update, you won’t be able to get Windows 10 anyway.If your device is or has been connected to a domain, or is managed by a system administrator, it may be blocked from the upgrade reservation. Check with your IT administrator.If your copy of Windows is not genuine, or if you have a Volume License copy (intended for businesses), the icon will not appear. To check this, open a Command Prompt (from the Start menu or screen, search for cmd, right-click on Command Prompt in the results and select Run as administrator), type slmgr /dli and then hit Enter. A window will appear with the channel in the Description line (Retail, OEM, or Volume), and the License Status.

If your copy of Windows is not activated, refer to Knowledge Base article 950929 for more information. If you have a Volume License copy, it does not qualify for the free upgrade.If neither of these two causes are the case with your copy of Windows and you have a genuine Windows 7 and Windows 8.1 running PC, you can try the various resolution steps below.Click and run this Windows troubleshooter to resolve the issue or you can also try these manual solution steps, but the troubleshooter will be faster and easier.Check your Windows version, edition, and Service Pack level.Windows 7: Open System by clicking the Start button, right-clicking Computer, and then clicking Properties.If your edition is Windows 7 Enterprise, this PC is not eligible for the free Windows 10 upgrade, because it is a Volume License edition intended for business use.If Service Pack 1 is not listed, you need to install it before you will get the upgrade icon. You can download it by going to: 8.1: From the Start screen, swipe in from the right to bring up the charms, and select Search, or just start typing to search. Search for pc info.If your edition is Windows 8 Enterprise or Windows 8.1 Enterprise, this PC is not eligible for the free Windows 10 upgrade, because it is a Volume License edition intended for business use.If your version is Windows RT or Windows 8.1 RT, this device is not eligible for the free Windows 10 upgrade.If your version is Windows 8, you need to do the free update to Windows 8.1 to be eligible for the Windows 10 upgrade. Instructions for upgrading to Windows 8.1 can be found at: updating to 8.1, you will also need to install this update: Step 2:Make sure Windows Update is turned on – for instructions to turn on Automatic Updates, see Knowledge Base article 306525. Then check to see if the necessary updates are installed. You need to have updates KB 3035583, KB 2952664 installed on Windows 7 and KB 3035583, KB 2976978, KB 2919355 on Windows 8. Either run automatic updates after turning it on else you can try doing below steps of you are more Windows savvy.To do this, from the Start menu or screen, search for cmd, right-click on Command Prompt in the results and select Run as administrator. Type or paste the command dism /online /get-packages | findstr 3035583 – if the update is installed, you will get a return with Package identity followed by a string of information.

If nothing is returned, the update is not installed, and you need to check for updates and install it.Windows 7: also run the command dism /online /get-packages | findstr 2952664If this update is not installed, install it now.Open Internet Explorer. Press Alt + H, and select About Internet Explorer from the menu that appears. Make sure you have Internet Explorer 11. If you have an earlier version, download Internet Explorer 11 from 8.1: also run the commandsdism /online /get-packages | findstr 2976978dism /online /get-packages | findstr 2919355If these are not installed, from the Start screen search for Check now, and select Check for updates to install those updates.After you have completed all of these updates, reboot your device and you should be able to reserve Windows 10 upgrade.In case, you are still not able to resolve the issue and you think your device has genuine Windows 7 SP1 / Windows 8.1 and also meets the system requirements, you may try to upgrade using ISO directly. Click here to read in details how to upgrade to Windows 10 using ISO. Not able to activate Windows 10If you took your PC to a repair shop or to someone who builds and fixes PCs, it’s possible that a different version of Windows was installed to complete a repair. Or, if a different product key was used for your PC during the repair, that key might be blocked if it was used on more PCs than the Microsoft Software License Terms allow.If Windows was activated before your PC was repaired or rebuilt, then re-entering the product key that came with your PC or original copy of Windows might solve the problem.

You can also try reinstalling your original version of Windows.

The Complete Guide to Preparing a Windows 8 Deployment Image using Audit Mode and Sysprep with an unattend.xml Answer File .

*i*m*g*575 voted If you found this information useful, click here to vote! No registration required. If you found this information useful, click here to vote! No registration required.Following on from my popular post regarding Windows 7 deployments using sysprep I needed to find out what the differences were for Windows 8. Most of the overall process is the same, however to highlight where it may be different for Windows 8 I have indicated these steps with this: W8Hint: In most cases throughout this tutorial, file names, script commands and the like are case sensitive. Table of Contents: Section 1 : Install Windows 7 and programsSection 2 : Create an unattend.xml answer fileSection 3 : Create a script to remove the unattend.xml file after deploymentSection 4 : Image before sysprepSection 5 : Run sysprep and imageSection 6 : Deploy imageAre you a V8 Supercar racing fan and have always wanted to visit the Bathurst 1000 SuperCheap Auto Great Race? Bathurst Accommodation coordinate short stay home hire style accommodation for groups and families. Don’t miss out this year!

Section 1 : Install Windows 8, Applications and CustomisationsInstall Windows 8 from DVD or USB flash driveImportant: When you arrive at the Welcome Screen (where you are asked to create a username and account) press CTRL+SHIFT+F3 to enter into ‘audit’ mode. The computer should restart and automatically log you into a temporary built-in administrator account. Cool ‘ey!Warning: After system startup, a sysprep GUI box will appear. Close this box (DO NOT PRESS ANY BUTTONS as this will activate the sysprep process and you may need to reinstall!).Now install any Windows Updates and deployment wide programs (such as Microsoft Office, Adobe Flash Player, Java, printer drivers etc). You can restart if required because you will automatically be logged back into this temporary built-in administrator account.

You will be stuck in this audit mode until sysprep is run later in the process.Remember to license and activate any required software (except for Windows as sysprep will undo Windows Activation) this will be remembered and you won’t have to perform it on each the deployed computers individually.Hint: Any modifications you make to this user profile will be automatically copied to the local system default user profile microsoft windows application experience. So if you don’t use roaming profiles, this is a great time to adjust your start menu, desktop wallpaper and icons, and general profile modifications as these settings will apply to all newly created users on the system. W8 Tiles can be a strange beast when you make your first image. Read through this Microsoft Support Article regarding problems that can occur from removing tiles – and a resolution on how to uninstall them if you don’t want them in your base image. To remove all the Apps, you will need to utilise PowerShell: Foreach ($x in (Get-AppxProvisionedPackage –Online)){Remove-AppxProvisionedPackage -Online –PackageName $x. PackageName}Customise the Windows 8.1 start screen to how you want it to appear for all users, then export the start screen using PowerShell (reference: Thanks John): Export-StartLayout -As BIN -Path DefaultStartScreenLayout.bin -VerboseThen import: POWERSHELL -NonInteractive -Command Import-StartLayout -LayoutPath .DefaultStartScreenLayout.bin -MountPath %SystemDrive%575 voted If you found this information useful, click here to vote!

No registration required. If you found this information useful, click here to vote! No registration required.Section 2 : Create an unattend.xml answer fileW8: ADK not WSIMHead over to the Microsoft website to download Windows Assessment and Deployment Kit (ADK) for Windows 8, if you don’t have it already. Why?W8Install Windows ADK on any compatible system, this doesn’t need to be your base image system (in fact it is better not to, however you can uninstall it after creating your unattend.xml if you like).Once installed, open the Windows System Image Manager by searching from the [start] menu. ADK looks pretty boring:W8 You may need to copy the “install.wim” from the Sources folder on your installation media to a writable destination as Windows ADK will need to create the Catalog file, I copied mine to the Desktop.Under the ‘Windows Image’ heading (bottom left) right click on ‘Select a Windows image or catalog file’, you will be presented with a file open dialogue. Select this W8install.wim file.The Windows SIM will generate the compatible catalog file required.Hint: If you experience errors during the catalog file generation it most likely is that you are running the incorrect bit version of Windows ADK, ensure you are running 64 or 32 bit Windows that matches Windows ADK. Also try running “dism /cleanup-wim” from the Command Prompt to clean up any previously attached wim files.In the File menu select to ‘Create a New Answer File’The overall idea of this utility is to create an unattend.xml file that the sysprep utility can utilise to preset settings during the Windows Setup process of the deployed image. Items like creating local user accounts, setting the Windows Product Key, setting the locale (language) information, setting network location settings and other items that you are normally presented with when installing Windows 8. As these settings are most often consistent across all of your deployment, it makes sense to set them automatically.

These next few steps may seem daunting at first, however all we are doing is obtaining possible options from the ‘Windows Image’ that we have loaded from step 4 and importing these options into the answer file, then specifying these settings.In the ‘Windows Image’ area (bottom left) select ‘ amd64_Microsoft-Windows-Security-SPP_6.2.9200.16384_neutral‘ (amd64 may also be x86 if you installed in 32bit) right-click it and select ‘Add to parse 3 generalize’. This moves this option into our answer file. Now select this item in the main window, this will show you the possible configuration options in the ‘Properties’ window on the right. Set ‘SkipRearm’ to 1. Hint: Technically this should overwrite the Windows 8 rearm limit from 3 to unlimited. Sometimes this hasn’t worked for me, and you could end up with a useless image after 3 sysprep’s. I will show you later [Section 4] how to ensure to overcome this.Now you have performed one setting and realised ‘ it’s not that bad‘ you should be able follow these steps for the following items:– amd64_Microsoft-Windows-Deployment_6.2.9200.16384_neutral into parse 4 specialize, right-click on RunSynchronous and add a command, then select ‘RunSynchronousCommand[Order=”1?]’ and in Properties add the following:Order: 1path: net user administrator /active:yesWillReboot: Never– amd64_Microsoft-Windows-Security-SPP-UX_ 6.2.9200.16384_neutral into parse 4 specializeSkipAutoActivation: false ( false will ensure that if you have used a volume license key Windows will automatically activate for you)– amd64_Microsoft-Windows-Shell-Setup_ 6.2.9200.16384_neutral into parse 4 specializeComputer Name: Leave blankCopyProfile: trueRegistered Organization: ( you must leave this as is in this section)Registered Owner: Windows User ( you must leave this as is in this section)ShowWindowsLive: falseTimeZone: AUS Eastern Standard Time ( Must be spelt exactly according to TimeZone settings here from Microsoft’s website)– amd64_Microsoft-Windows-International-Core_ 6.2.9200.16384_neutral into parse 7 oobeSystemInputLocale: en-auSystemLocale: en-auUILanguage: en-auUserLocale: en-au– amd64_Microsoft-Windows-Shell-Setup_ 6.2.9200.16384_neutral into parse 7 oobeSystemRegisteredOrganization: Your Company NameRegisteredOwner: Your NameAutoLogonEnabled: trueLogonCount: 5 ( this will automatically log into the following account this number of times after setup so you can easily perform other software activations etc. Logging out will override this setting.)Username: administratorPassword: Administrator PasswordFirstLogonCommands ( right-click and add 2)SynchronousCommand[Order=”1?]CommandLine: cscript //b c:windowssystem32slmgr.vbs /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX ( windows 8 license key)Order: 1RequiresUserInput: falseSynchronousCommand[Order=”2?]CommandLine: cscript //b c:windowssystem32slmgr.vbs /atoOrder: 2RequiresUserInput: falseOOBEHideEULAPage: trueNetworkLocation: ( Home/Work/etc)ProtectYourPC: 1UserAccountsAdministratorPassword: Administrator PasswordOn LocalAccounts, right-click and select action: AddListItem ( this automatically creates a local Admin account)LocalAccount[Name=”Administrator”]Description: Local AdministratorDisplayName: AdministratorGroup: AdministratorsName: AdministratorPassword: Administrator Password575 voted If you found this information useful, click here to vote! No registration required.

If you found this information useful, click here to vote! No registration required.Section 3 : Create a script to remove the unattend.xml file after deploymentOn the deployment base image computer open Notepad and enter in the following lines: del /Q /F c:windowssystem32sysprepunattend.xmldel /Q /F c:windowspantherunattend.xmlThese lines of code will delete the unattend.xml file from the computer once the Windows Setup is finished with them (this file is copied into the panther directory during setup hence the two lines)Save this file to the desktop called SetupComplete.cmd (ensure to change the file type from .txt to all types so the file doesn’t get saved as SetupComplete.cmd.txt)Now create a folder called Scripts in this directory: C:WindowsSetup and drag this file into it (you may be prompted for Administrator authority). Hint: Windows will automatically check for the existence of this file and run it after Windows Setup has completed, feel free to add anything else into this file you think may be helpful at this stage.575 voted If you found this information useful, click here to vote! No registration required. If you found this information useful, click here to vote! No registration required. Section 4 : Image before sysprepThis is an optional step, however it is a lot easier down the track to restore an image of your current system to apply updates/modifications to before you run sysprep. This also ensures that you don’t run into any activation issues (as mentioned earlier Windows 8 has a maximum number of 3 rearms before the image can no longer be sysprepped, rendering your image useless for deployment).Use your preferred PE boot environment to upload the image to a server (I use DeployStudio as we are a majority Mac school, however it still supports Windows PXE boot and you can share the same Windows image on PCs as well as bootcamp partitions).

Please let me know if you would like a blog post about this section in more detail!575 voted If you found this information useful, click here to vote! No registration required. If you found this information useful, click here to vote! No registration required. Section 5 : Run sysprep and imageEnsure your unattend.xml file is in: C:windowssystem32sysprepHold SHIFT and right-click on the sysprep folder and select ‘Open New Command Windows Here’Input the following command to initiate sysprep loading the unattend.xml file (this is all one line of code): sysprep /generalize /oobe /shutdown /unattend:c:windowssystem32sysprepunattend.xmlOnce the computer has finished the sysprep process it will shutdown ready for imaging!Image the computer.575 voted If you found this information useful, click here to vote! No registration required.

If you found this information useful, click here to vote! No registration required.Section 6 : Deploy imageOnce you have your sysprepped image, deploy it to your clients using your usual imaging processThe computer will restart twice after the image has been applied, installing device drivers and preparing the system for first bootYou should be prompted for a computer name, enter a unique name and continue. You will notice you will not be prompted for any other information as this has all been supplied from the unattend.xml fileYou should then be automatically logged into the Administrator account that was created from the unattend.xml file to enable you to join the computer to Active Directory and run any other post-imaging tasks you may require.Hint: It is worth checking on one computer that the unattend.xml file has been deleted as well as any other testing you may wish to perform.Hint: If you need to update the base image, restore the pre-sysprep image and follow from Section 5.I hope you have found this tutorial informational and helpful. Please don’t hesitate to comment if you have any suggestions/feedback or otherwise.April 25, 2013 at 7:08 amHi,I just got into this before i even googled this but anyhow…i created an account, actived the built-in admin then removed my initial account and started to intall all programs and upfates with that account.This does not mean I’m in audit-mode but is there a way to copy this admin-profile to the default-one?What i also noticed it that you can’t open any apps using this account. But maybe it’s because it’s a local account and not a MS-account?Good tutorial buy the wayStijnSeptember 26, 2013 at 5:57 amHello,Thanks for the detailed HOWTO, however, I’ve followed the steps and after sysprep I am logged on as the local Administrator with metro/Start screen up and all my tiles I added are listed, as well as default tiles.

I’ve tried these steps several times and each time I log on as a user, existing or new, the metro/Start screen always loads default tiles in addition to the tiles I modified during Step 1 Section 6.As a side note, I had installed AVG 2013 prior to sysprep and after imaging and sysprep I ran into an error that Windows could not load the configuration. After a few hours of troubleshooting I found AVG requires avgprep tool to be run prior to sysprep. Once I performed the required steps I was able to boot, complete OOBE, and log in.Thanks,DaveOctober 31, 2013 at 12:34 amI ran into an odd issue with sysprep and windows 8 last night. I’ve been doing this for years with Windows 7 and several months with Windows 8. The Steam Powered client (an .msi file) would not install on my laptop, I kept getting Windows Installer errors 2502 and 2503. It would install fine in audit mode, but not after sysprep and creating a new account with administrator rights. Turns out I had to add my user account to have write permissions to C:WindowsTemp even though the administrators group already had it and my account was a member of that group. What is sysprep on Windows 8 missing with the C:WindowsTemp folder that was working with Windows 7? Any ideas? I can’t roll out an image to clients before they accept a EULA and create an account this way.December 11, 2013 at 1:30 amHi, I’m following your really precious guide to deploy Win8 on a number of PCs: some of them are new Lenovo and therefore have their Product Key recorded into the BIOS others have to be upgraded from OEM Win7, and we need to use a MAK Product Key provided by our Group.The question is: how can I deal with Product key input and Windows activation?In the first case, minisetup should be able to get it from BIOS and skip user’s input in the other, user should be asked to input the provided Product Key.How can I prepare a unique unattend.xml file ?Thanks in advance,SergioFebruary 27, 2014 at 5:44 pmHi Jules,Thanks for your comment.

No I wouldn’t recommend this as when a computer is bound to the domain, a Unique Identifier (UID) is created for the computer account in Active Directory. If this same UID is cloned to all of your computers, Active Directory actually won’t be able to tell them apart as this is what it utilises to identify the computers, not the computer name. If you were to do it however, say to test out some group policies or mapped drives etc, I believe that the sys prep process will unbind and remove the domain binding. Although I haven’t tested this. If you do, ensure to remove it from the domain prior to running sys prep and creating your image.Hope this helps.Kind regards,Sam.February 27, 2014 at 6:03 pmHi Jules,Just a followup thought. If you are interested in having the PCs join the domain automatically after the image has been applied, look into utilising the SetupComplete.cmd file and either the netdom command for XP or PowerShell:Create a PowerShell file C:windowssystem32sysprepjoinDomain.ps1 containing:$domain = myDomain$password = myPassword! | ConvertTo-SecureString -asPlainText -Force$username = $domainmyUserAccount$credential = New-Object System.Management.Automation.PSCredential($username,$password)Add-Computer -DomainName $domain -Credential $credentialReferenceModify the SetupComplete.cmd file:del /Q /F c:windowssystem32sysprepunattend.xmldel /Q /F c:windowspantherunattend.xmlPowershell.exe -executionpolicy remotesigned -File C:windowssystem32sysprepjoinDomain.ps1del /Q /F c:windowssystem32sysprepjoinDomain.ps1ReferenceDon’t forget that last line to delete the PowerShell script after it has been run – as it will have a domain administrators password saved in it!And this will need testing, as I’m not entirely sure when this is run. It may run too early (before giving the computer a name) in which case you might need to add it into the built-in administrators startup items…Kind regards,Sam.April 23, 2014 at 11:47 pmSam,I hope you see this comment. I tried to find your information, but this site doesn’t share any of the info it seems.Anyway, on section step 2… I tried this and got into the built in administrator account.

I thought it was awesome, but the problem is that I couldn’t do Windows updates. I kept getting some error and finally found out with the help of forums, it was because I was in this audit mode. So, I rebuilt the machine and this time I didn’t go into audit mode. I installed all my apps and got all the important Windows updates. Now I would like to get back into this audit mode so I can setup the profile how I would like for it to look for all users.

How do I do that… or is it even possible at this point?Thanks,Doug D.May 14, 2014 at 6:08 amCan’t thank you enough for this great guide. I work for Case Western Reserve University in Ohio and we are working on creating a fresh 8.1 image for students. I followed these steps but ran into one issue, after i captured the image and pulled it down onto a machine some of the preferences are not how we left them before sysprep. For instance we changed the desktop background and added some shortcuts to the taskbar and that didnt carry over. The desktop shortcuts and programs did but nothing else. Curious the image we set as the background was not stored locally anywhere on the machine, possibly that is the issue there. Did i perhaps miss a step or a setting somewhere that made the image lose these settings?Thank youFebruary 14, 2015 at 10:13 pmHi Jando,Thanks for your comment. Apologies for the delay in my reply.Thankfully if you are happy to put in the investigative work, there are some log files which you can inspect.generalize is usually found: %WINDIR%System32SysprepPantherspecialize is usually found: %WINDIR%PantherUnattended Windows setup actions is usually found: %WINDIR%PantherUnattendgcObviously in order to be able to read these files you need an OS to attach this hard disk to which is failing.

You could either run a PXE environment or boot from a live Ubuntu CD – after all it is just a text file on a partitionKind regards,SamFebruary 14, 2015 at 10:26 pmHi Scott,Thanks for your comment.I have run into this situation previously and most of the time I found it was to do with graphics drivers. I never looked deep enough to really work out why, but can I suggest you build your image as normal EXCEPT don’t install any better graphics drivers. What you can do as part of the first boot script or through the sys prep itself, inject the drivers AFTER. So you set it all up with scripts or sys prep – run sys prep which injects the drivers after first boot.Hope this offers some guidance. If you ended up finding a solution it would be great if you could share it back.Kind regards,Sam.April 1, 2015 at 1:04 amExcellent guide, however I really could not make unattend.xml o work.

I am using Server 2008 R2 as WDS and Client image is Win 8.1 Pro.The guide really helped me for sysprep but unattend process really is a challenge on Win 8.1 Pro. Anyone successful in using unattend.xml on Win 8,.1 Pro with 2008 R2 (WDS) ? If so please share your xml files here.please note for full automation process we need two XML files. One for windows deployment setup and one for customisation of Windows image. an unattended installation——————————————————————————–Optionally, you can automate the entire installation. To do this, you use two different unattend files: one for the Windows Deployment Services UI screens, and one for the latter phases of Setup.• Windows Deployment Services client unattend file. This file uses the Unattend.xml format and is stored on the Windows Deployment Services server in the C:RemoteInstallWDSClientUnattend folder. It is used to automate the Windows Deployment Services client user interface screens (such as entering credentials, choosing an install image, and configuring the disk).• Image unattend file.

This file can use either the Unattend.xml or Sysprep.inf format. It is stored in a subfolder (either $OEM$ structure or Unattend) in the per-image folder. It is used to automate the remaining phases of setup (for example, offline servicing, Sysprep specialize, and mini-setup).Recent PostsI’m taking part in a Charity Rally! Find out more and support me!Not receiving echo response on custom bash script run from rc.local with readFirefox version 29.0.1 SSL invalid certificate can’t confirm exceptionCreate an AWStats auto generated index page in PHPlogrotate prerotate postrotate to run only once not multiple timesIncrease Apache SSLCipherSuite to deny SSLv2 and meet PCI ComplianceHow To: Apache Tips – Redirect all traffic over SSL and Rewrite URL with a 301 RedirectHow To: Set up SSH key exchangeIncrease VirtualBox Hard Disk SizeHow to setup Apple Configurator to mass prepare deployment of iPadsForce Managed Preferences refresh on MacCreate an 802.1X System Profile for Lion/Mountain LionConfiguring DNS to share Bonjour printers across subnets and VLANs (including AirPrint for iOS)The Complete Guide to Preparing a Windows 8 Deployment Image using Audit Mode and Sysprep with an unattend.xml Answer FileThe Complete Guide to Preparing a Windows 7 Deployment Image using Audit Mode and Sysprep with an unattend.xml Answer File

Rens Hollanders .

*i*m*g*Yes that’s right. Tested it the past week when creating an reference image for a project. It appeared to me that every time when I’ve wanted to install the .NET 2.0 and 3.0 feature on Windows 8.1 via command line or in MDT using the “Install Roles and Features” step and have ‘slipstreamed’ a language pack in Windows 8.1 with DISM upfront, the installation went wrong due to the fact that the SourcesSXS folder could not be found. This is something I’ve already seen as a question on social.technet which also lead to this investigation figure 1.1: Error showing in bdd.logFor reasons unknown as we can see in the logfile the source path is changed from the value that I have specified to: C:MININTSources while it should point to “%DEPLOYROOT%Operating SystemsWindows 8.1 x64 EnterpriseSourcesSXS”So I’ve started some testing and debugging, tried different scenarios such as: copying files locally, using an cmd installation file etc. Nothing seemed to work when the language pack was installed.

Therefore I’ve performed a deployment without any additional language packs and it came to my attention NET FX 3.5 installs correctly without any issues.Now how did I get around this?Basically there are three options to install the .NET Framework 2.0 and 3.0 on Windows 8.1Manual by hand from the GUIBy command line using DISMBy using the “Install Roles and Feature” step in MDT figure 1.2: Using the GUI figure 1.3: Using the command line figure 1.4: Using the “Install Roles and Feature” stepThe way to get around this nasty ‘issue’ that DISM ‘sayes’ it can’t find the SXS source file location is to put the installation of NetFX before the installation of the language pack.Currently I use the following scenario:Added the SourcesSXS folder from the operating system I use (which is currently Windows 8.1 x64 Enterprise) as an application into the Microsoft Deployment Toolkit and within the application I’ve created the following cmd:DISM / online / enable - feature / featurename : NetFx3 / All / Source : C : Temp Sources SXS / LimitAccessThis will copy the SourcesSXS folder locally to the machine into C:Temp and then executes the DISM command to enable the NetFx3 feature. At the end of my task sequence I perform a cleanup of some folders which deletes the content copied locally. I then call the cmd as command line for my application installation. Perhaps not the tidiest way to do it. But using cmd’s makes sure you can execute multiple commands just by starting one cmd. Instead of having to break things down in MDT with single command lines.Another solution may be to put an Task Sequence Variable at the beginning of the task sequence called: WindowsSource which holds the following value (points to the following location) “%DEPLOYROOT%Operating SystemsWindows 8.1 x64 EnterpriseSourcesSXS” and use the “Install Roles and Features” step.Whatever you do, just make sure the installation of NetFx3 happens before the installation of a Windows language pack. And I’ve put a restart step after the installation of NetFx3 just to be sure.

And since this is during the building of the reference image, time is not of the essence here. So having another reboot more or less doesn’t matter in this particular case. figure 1.5: Task Sequence Variable – WindowsSource figure 1.6: Task Sequence Properties – “Install Roles and Feature” stepOr use an application, like the script mentioned above: figure 1.7: Application Properties figure 1.8: Task Sequence Properties – Install ApplicationHope this can be of help to anyone, if you have encountered something different. Have a different approach or just want ask something? Please feel free to contribute in the comments. Thanks for readingHi Ajay,I have looked at your logfile but can’t find a direct error that leads to the cause of this.

You can try Kees’ solution by adding the SXS files from the same source and language if you have embedded an additional language pack.The only pointers I’ve found in your log is:DISM Provider Store: PID=5232 TID=3492 Failed to Load the provider: C:UsersAJAYPR~1AppDataLocalTempD9F01778-F2E3-46FD-956B-7DBC45C89D1EWow64provider.dll. – CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)and:2014-04-30 17:58:23, Info DISM DISM Package Manager: PID=5232 TID=1332 Error in operation: (null) (CBS HRESULT=0x800736cc) – CCbsConUIHandler::Error2014-04-30 17:58:24, Error DISM DISM Package Manager: PID=5232 TID=3492 Failed finalizing changes. – CDISMPackageManager::Internal_Finalize(hr:0x800736cc)2014-04-30 17:58:24, Error DISM DISM Package Manager: PID=5232 TID=3492 Failed processing package changes with session options – CDISMPackageManager::ProcessChangesWithOptions(hr:0x800736cc)2014-04-30 17:58:24, Error DISM DISM Package Manager: PID=5232 TID=3492 Failed ProcessChanges. – CPackageManagerCLIHandler::Private_ProcessFeatureChange(hr:0x800736cc)2014-04-30 17:58:25, Error DISM DISM Package Manager: PID=5232 TID=3492 Failed while processing command enable-feature. – CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x800736cc)But there isn’t anything that reveals the cause. framework 2012 2013 2014 2015 active directory bitlocker block bootstrap.ini citrix community customsettings.ini directaccess gpo group policy management hp internet explorer intune litetouch locale settings lti mct mdt mdt 2012 update 1 mdt 2013 mdt 2013 update 1 microsoft office 365 operating system deployment outlook powershell questions regional settings RES sccm server 2012R2 ssd task sequence task sequence variable unattended user exit script windows 8.1 workshop workspace manager xenapp Most Read PostsMDT - Put the domain join where it belongs..MDT - Monitoring creates event viewer entriesThis blog isn't dead, just looking for new content...MDT - Inject printer driversOffice 365 - Updated deployment guide

Alternate Step-by-step Guide to installing Windows 8.1 Enterprise on the Dell Venue 8 Pro .

*i*m*g*Alternate Step-by-step Guide to installing Windows 8.1 on the Dell Venue 8 ProI present here one method of installing Windows 8.1 to your Dell Venue 8 Pro.StirCwazy has posted another method here which has some similarities and served as the inspiration to write this tutorial.I believe my tutorial has some advantages in the following areas:I present an alternate method for creating the USB media with diskpart (vs. Windows 7 USB tool) which I believe is more foolproof and should help with some people who have had issues booting.I utilize the Dell Venue 8 Pro Win 8.1 Driver Cab for driver injection which is a more comprehensive list of drivers.I provide an AutoUnattended.xml file which will eliminate all interactive prompts during the install process. What this means is that no USB hub, keyboard, or mouse is required to perform the install.So why would you want to install your own copy of Windows 8.1 instead of what Dell provides? Actually, Dell's installation is relatively streamlined. They haven't included too much junkware on the system. However, you may want to take advantage of the features of another version, like Enterprise. Alternatively, you may be trying to squeeze an extra GB or two of space from your own basic install.Notes before you beginThis method was tested with Windows 8.1 Enterprise, but technically should work for any version of Windows 8.1. However, some versions of Windows can simply be upgraded by entering a new product key in System Properties.

If you are simply looking to upgrade the Home version on the DV8P to Windows 8.1 Pro, you should simply be able to purchase the upgrade and activate it without doing a full re-install.The AutoUnattend.xml file provided below will WIPE the entire eMMC (Hard Drive) on the DV8P in order to perform a 100% clean install of Windows.Therefore, if desired, you should move the recovery partition off the drive (see Regain the Recover Partition here). Having the recovery partition on a backup drive will allow you to reinstall the Windows 8.1 Home version shipped by Dell should you choose to.You may also wish to download a keyfinder program to find out your OEM Windows 8.1 Home Product Key as Dell does not provide a hard-copy of the Key. This should only be necessary if you try to install from your own copy of Windows 8.1 Home Media (OEM).Better yet, follow my Step-by-step guide to creating a factory backup image for the Dell Venue 8 Pro to get a complete image of your system to restore in the future in ANY scenario. If you do - consider also following my Step-by-step guide to creating a multi-boot Backup/Recovery and Install USB drive for the Dell Venue 8 Pro to create a single USB for all your needs.This document shows what the Default and Recommended Disk configurations are on Windows 8.1 UEFI-based systems:The default configuration is what would happen if you just let Windows decide.The recommended configuration places the Windows Recovery tools on their own partition and also creates a Recovery Image partition. This connfiguration is similar to the DV8P factory setup.Of course, since we want to maximize our drive space, the AutoUnattend.xml will not create the final Recovery Image partition.It will, however, create the Windows Recovery partition.

This partition is only 300MB and it means the WinRE.wim file (approx 250MB) will be placed here instead of on the Windows drive. What this means is that we aren't really taking up more space with this partition, as we are freeing up approximately the same amount on the main Windows drive. Having the WinRE data on its own partition has certain benefits of recovery, which we won't detail here.Note there is conflicting information in the Microsoft documentation on what the default configuration is. The link above shows the default configuration without a WinRE partition, but in fact, a WinRE partition is the default as described here.For even more information on Windows 8.1 disk partitions see here.What you needWindows 8.1 DVD or ISO (e.g. en_windows_8_1_enterprise_x86_dvd_2972289.iso)An AutoUnattend.xml file - use mine:View attachment AutoUnattend.zipDell Venue 8 Pro Win 8.1 Driver Cab - 5830-win8.1-A00-9Y5Y5.CABIntel Platform Driver Installer - 5830_Drivers-for-OS-Deployment_Driver_3VR67_WN_603.9600.2067.26305_A03.EXEA 4+ GB USB driveA micro-USB OTG cable to connect your USB drive to the DV8PCreate the following folder structureC:DV8PWinC:DV8PWinDriversC:DV8PWinImageC:DV8PWinTempC:DV8PWinUSBCopy the Windows FilesCopy the contents of your windows DVD/ISO to the C:DV8PWinUSB directory.You should have a boot, efi, sources, and support directory as well as bootmgr, setup, and some other assorted files.Prepare the DriversExtract 5830-win8.1-A00-9Y5Y5.CAB with Winzip/WinRar/CabArc/etc. to C:DV8PWinTempNavigate to C:DV8PWinTemp5830-win8.1-A00-9Y5Y55830win8.1x86Cut and Paste the 'chipset' and 'network' folders into C:DV8PWinDriversOpen C:DV8PWinDriversnetwork379GH_A00-00productionWindows8.1-x86Bluetooth-Driverqcbtuart.inf in your favorite text editor:Find the section entitled [SourceDisksFiles] and remove all entries except:qcbtuart.sys?*This step is required since the .INF file lists driver files that are not needed/present and therefore must be removed.Run 5830_Drivers-for-OS-Deployment_Driver_3VR67_WN_603.9600.2067.26305_A03.exe and choose Extract without installing to C:DV8PWinTempNavigate to C:DV8PWinTempDrivers and copy the Audio and WCE directories to C:DV8PWinDriversMount the ImageOpen an Administrative Command Prompt (i.e. Run As Administrator)Mount the Windows 8.1 .wim Image with Dism:dism.exe /Mount-WIM /WimFile:C:DV8PWinUSBsourcesinstall.wim /index:1 /MountDir:C:DV8PWinImageImport the DriversImport the drivers into the image:dism.exe /image:C:DV8PWinImage /Add-Driver /driver:C:DV8PWinDrivers /recurse /forceunsigned*There should be 57 drivers that import. If 57 did not import you should review the Prepare the image and drivers section above.Enable additional packages (optional)You can enable additional packages within the Windows installation so that they are automatically installed.I would highly recommend enabling .NET Framework 3.5 as it is needed by many applications (and 4.5 is not backwards compatible):dism /image:c:dv8pwinimage /enable-feature /featurename:netfx3 /all /source:c:DV8PWinUSBsourcessxsI also prefer to have the telnet client enabled by default:dism /image:c:dv8pwinimage /enable-feature /featurename:telnetclient /allDismount the ImageDismount the image saving the changes:dism.exe /Unmount-wim /mountdir:C:DV8PWinImage /commitModify the AutoUnattend.XMLThe AutoUnattend.XML is crafted with only a few options, including:Create partitionsAssign License KeySet Registered User/OrganizationSet Computer NameExtract the file attached aboveOpen AutoUnattend.xml in your favorite text editor (e.g. notepad)I would highly recommend you only modify the following section:HTML: MHF9N-XY6XB-WVXMC-BTDCT-MKKG7Registered OrganizationRegistered UserMYDV8PYou can replace your product key with the one listed (default Volume License Key) activate windows 8.1 pro command line. The key I have provided is enough to install Windows, but it will not activate until you provide a valid key.You should replace RegisteredOrganization, RegisteredOwner, and ComputerName with your own values. If you would rather not set them here, simply delete the appropriate lines.Save the file and place in the root of c:DV8PWinUSBPrepare the USB DriveInsert your USB drive into the staging computerRun diskpart (from your Administrative Command Prompt)Run list disk to identify which disk is your USB (determine based on size)Run select disk x where x is the number of your USB disk (e.g. select disk 1)Run the following commands:cleancreate part priformat fs=fat32 label=DV8PWin quickactiveassignexit?Copy the contents of C:DV8PWinUSB to your prepared USB drive:xcopy C:DV8PWinUSB F: /e /c /i /f /h /k /j(where F: is the drive letter of your USB drive)Installing WindowsPower off your DV8PEnter BIOS by powering on your DV8P and holding the Volume button down for 3-5 secondsIn BIOS tap BootTap Boot Option #1 and select the USB keyTap on the keyboard icon in the top rightTap F10Tap Yes to Save configuration and restartYour DV8P should now boot from the USB key and perform an unattended installation of Windows 8.1 Enterprise.Install System AppsInstall any additional apps/patches from the Dell driver pageAs of the date of this writing, I recommend you install:Ambient Light Sensor Settings for Dell Venue 8 Pro 5830Dell Wireless 1538 WAPI ApplicationAny others that might exist are optional, remember all the drivers should already be loaded from the previous steps.Additional Steps (optional)Activate Windows (if you didn't provide a valid key in the AutoUnattend.xml)Install Windows UpdatesFree up even more space! - Guide to Maximizing Disk Space on your Dell Venue 8 Pro (or other Windows 8.1 system)...Click to expand...Dell does not provide a CD key for Windows with the DV8P.

The only key they provide is the Office key. It is possible to recover the Windows key from the installed OS, but it is an OEM key and thus requires OEM media - which Dell does not provide.So if you want to fully rebuild as per this tutorial you need to get the media that matches your CD key. Since it is unlikely you will get a hold of OEM media, you will need either Retail or Volume (VLK) media and a matching key.I would recommend using the link in my sig to make a factory backup that way you can restore your whole system regardless. This method is more for someone who wants to do a fully custom Windows Install (and therefore likely has their own media and key).a quick update, I have been having issues all evening with DISM. I am running Win7x64. Mount and Unmount are fine, but the drivers step kept failing. Was getting this error:an error occurred while attempting to start the servicing process for the image along with error code 0xc0000135turns out the issue was with the DISM version in Win7.

In the 'Create Factory Backup' tutorial we have to download the 'Deployment and Imaging Tools Environment' and use that. Using DISM instructions in this environment is what worked for me.Good luck to all!

How to activate Windows 8.1 Pro (Build 9600) PERMANENTLY and LEGALLY 100% WORKING OCT. 8, 2015